Impactors Equipment In Asia & Middle East
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Impactor probe coupling system angle 90 °. For connecting isokinetic nozzle (SAC-100) into impactor ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
4-stage impactor (D50 2.5-1.0-0.5-0.2 μm) and 70 mm back-up filter stage. Package includes carry case, spacer rings (2 pcs), quick connectors for outlet and inlet, spare set of metal springs (12 pcs), user manual and calibration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Enables heating of the Dekat® PM10 Impactor up to 200 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
N1312 is intended for use as ELPI®+ spare impactor only. For existing users, please inform the serial number of the ELPI+ together with the purchase ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
10 and 2.5 μm collection plates plus storage case. 10 and 1 μm collection plates plus storage case. 3 collection plates plus storage ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Temperature controller for operating the heating jacket (PH-2023 or ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Impactor collection plate set, 14pcs. Spare set of impactor collection plates. Incl. 14pcs of DLPI+ impactor collection plates and a storage case. Storage case for impactor collection ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt Microbial Impactor enables the capture of microbiologically viable particulates on a suitable media surface for later incubation and enumeration. With precision-cut slits to ensure laminar flow, the BioCapt Viable Microbial Impactor maximizes collection efficiencies for viable particles in accordance with ISO 14698-1. The 25 L/min ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
70 mm filter stage holder with 2.5 μm ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon A6 Bioaerosol Impactor is a single stage bioaerosol impaction sampler for the viable sampling of mold and ...
-
Manufactured by TSI Incorporatedbased in USA
The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by Tisch Environmental Incbased in USA
Our Personal Cascade Impactor is a precision cascade impactor worn by personnel to provide complete and accurate aerodynamic particle size distributions of the particulate in their environment. A personal mounting bracket is provided to attach to the subject’s lapel or pocket. It is compact, light-weight (7 oz. Max.) and are available with ...
-
Manufactured by Baioni Crushing Plants Spabased in ITALY
Vertical axis mills are designed to combine high productivity with a good efficiency and an excellent reduction ratio of finished products. Baioni vertical shaft impactor MV 2400 is employed as a rock-on- rock impactor, the configuration of which must be chosen according to production needs and degree of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you