Munters Environmental Industry Equipment In Asia & Middle East
-
Manufactured by Muntersbased in USA
The streamlined separator profiles deflect the droplet laden gas stream; as a result the momentum of the droplets causes them to impinge onto the profile surface. The droplets coalesce together and form a liquid film, draining back down under the influence of gravity. Target applications FGD absorbers (Flue Gas Desulphurization) Vertical gas scrubbers Gas cleaning devices in waste incineration ...
-
Manufactured by Muntersbased in USA
DF 2100 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2100 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most ...
-
Manufactured by Muntersbased in USA
Two superposed units forming a diamond structure. Process designers have the possibility to extract two benefits from the configuration. First the system requires a single layer of support beams instead of two. Second, the total system height is maximum 2.6 m. Comparing the total required installation height of Design I and III the absorber height can be reduced up to 600mm without reducing any ...
-
Manufactured by Muntersbased in USA
Built up by standard modules the ML Plus concept is a compact standardised standalone dehumidification system with incorporated temperature and humidity control. Our ML Plus-system can be configured with booster fan, humidifier, pre- and post coolers and heaters according to your requirements. The ML Plus system is built up in elements, assembled and tested at our factory - ready for immediate ...
-
Manufactured by Muntersbased in USA
Ammonia is a natural residual product from livestock production and because of environmental regulations many farmers are facing limits for ammonia emission – especially when they increase their animal production. In order to make it possible for farmers to enlarge their production in areas with ammonia restrictions, Munters has developed air ...
-
Manufactured by Muntersbased in USA
The DH 5000 (TS-5 series) droplet separator is a vane type separator for horizontal flow. The gas flow charged with liquid droplets is directed through eliminator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained ...
-
Manufactured by Muntersbased in USA
Munters DPV is a double pocket type vane type separator for service in high velocity and high liquid removal applications. It is part of Munters series of high performance vane type separators (DH5000 and DPV) with elevated K-values. Specially designed drain channels collect the liquid which flows away under the influence of gravity. So-called double pocket vane type separators drain the captured ...
-
Manufactured by Muntersbased in USA
DF 2800 is a ready-to-install droplet separator for use in many application areas. It is available fit a wide range of operating conditions. DF 2800 droplet separator provides high efficiency droplet separation and extreme low pressure drop even at medium face velocities giving energy saving operation. The droplet separator can be configured to most individual performance and installation ...
-
Manufactured by Muntersbased in USA
DH Series droplet separators when assembled into units form a vane type separator for horizontal flow. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced polypropylene, but also aluminum. It can therefore be utilized under different operating ...
-
Manufactured by Muntersbased in USA
DH 2500 droplet separator profile when assembled into units forms a vane type separator for horizontal flow design for the HVAC applications, especially for the installation behind cooling coils. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
Manufactured by Muntersbased in USA
This controller supports up to six temperature sensors, two humidity sensors, two bird scales, one CO2 sensor, various types of heaters, a static pressure sensor, and more. The AC-2000 Pigs can be ordered with 12 or 20 ...
-
Manufactured by Muntersbased in USA
Instead of struggling with individual thermostats for heat zones and ventilation, AC-2000 3G brings them all together into one convenient place with great accuracy. The AC-2000 3G optimizes and precisely applies your equipment and energy sources to most benefit from the accuracy of your computer and ...
-
Manufactured by Muntersbased in USA
DF-Series droplet separators are ready-to-install droplet separators for use in many application areas, e.g. in HVAC, marine & offshore and land based ...
-
Manufactured by Muntersbased in USA
One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration plants and Inlet and exhaust scrubbers with high cleaning requirements. Available in ...
-
Manufactured by Muntersbased in USA
The M120 desiccant dehumidifier is designed to efficiently dehumidify air. Its very compact construction incorporates sections held together by four bolts. The sections contain fans that are driven by a common motor, a direct gear driven desiccant rotor, and a reactivation airflow heater. The two end casings contain distribution chambers with isolated sections that provide a precise balance for ...
-
Manufactured by Muntersbased in USA
Munters´ Ultra-Flow is a 3-stage vane type separator system for vertical gas flows with an integrated online cleaning system. Ultra-Flow has been designed as modular system to enable easy maintenance. A brand-new design with drainage system is developed for Ultra-Flow to remove liquid easily out of the gas flow. This profile enables robust operation and reduced installation downtime ...
-
Manufactured by Muntersbased in USA
CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration and meets the UL Environmental GREENGUARD GOLD certifications emission standards, improving the indoor air quality for both humans and ...
-
Manufactured by Muntersbased in USA
The Breeze Fan is a High Volume Low Speed fan, engineered to circulate a vast amount of air, providing the most efficient air circulation movement for animal housing. The Breeze Fan works on a simple principle – creates slow, gentle breezes to lower the effective temperature during warm periods and to circulate the rising warm air downward to ground level during cold periods. In addition, ...
-
Manufactured by Muntersbased in USA
Alumina Supports have a wide range of surface areas and pore volumes. The supports can be treated for excellent stability at high temperatures to avoid agglomeration/sintering of surface metals. They are appropriate for intermediate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you