Environmental Industry Equipment In New Brunswick
-
ShowcaseManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
ShowcaseManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
PremiumManufactured by AMS, Inc.based in USA
The Deluxe AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. This kit features the trusted AMS Signature Series thread pattern, which takes 2-1/2 revolutions to connect & disconnect. The two-piece 36-inch Tile Probe (with rounded safety tip) has a detachable plastic handle & zinc plated ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Turf Probe has been designed to collect a 1/2" x 7" soil sample from grass and turf. The small diameter helps you minimize damage to your greens, and the slot of the turf probe allows for easy visual inspection, emptying and cleaning. The one-piece probe is made of nickel-plated carbon steel and has a built-in, corrosion resistant, 10" rubber-gripped cross handle. The sturdy design ...
-
PremiumManufactured by AMS, Inc.based in USA
The Munsell Soil Color Chart Binder allows for color classification of soils using 250 mounted chips. The Munsell Color Chart enables color classification of soils using 250 mounted color chips. Developed with the U.S. Soil Conservation Service, this guide is the industry standard. The McCollough Geo Guide Card and Geotechnical Gauge provide easy to use geotechnical information. The Geo Guide ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the ...
-
PremiumManufactured by AMS, Inc.based in USA
1-3/4" X 18" Splined Concrete Bit. Total length is 24", but the usable length is ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Dual-Purpose Replaceable-Tip Soil Recovery Probes can be used with or without liners, and allow for the tip of the soil probe to be replaced after heavy use, or used with optional AMS tips for better results in various soil lithologies. AMS Dual-Purpose Replaceable-Tip Soil Recovery Probes include a slotted probe body, top cap, 10' comfortably gripped cross handle, a replaceable coring tip, ...
-
PremiumManufactured by AMS, Inc.based in USA
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas sampling systems with several options to allow sampling for a wide variety of regulatory and standard ...
-
PremiumManufactured by AMS, Inc.based in USA
Excellent for monitoring and sampling hydrocarbon spill sites, underground storage tanks and pipelines. AMS GVP kits use an AMS slide hammer or an electric rotary drive hammer and GVP drive extensions to insert a stainless steel GVP tip to the desired sampling depth. Fluoropolymer tubing is attached to a barb fitting on the GVP tip for remote sampling from the surface. Two GVP tips are available ...
-
PremiumManufactured by AMS, Inc.based in USA
The new professional series regular soil augers have been beefed up from bit to bale. They feature the trusted AMS 3/4in threaded connection and have thicker (11 gauge) cutting teeth with stronger welds and extra tungsten carbide hard surfacing. Professional augers are also reinforced with extra gussets welded at both the top and bottom of the bail. The gussets help prevent the bail from bending ...
-
PremiumManufactured by AMS, Inc.based in USA
The quick connect repair kit is used to repair quick connect connections. The finger rig is used to press the connection pin to release the ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The PowerCoreTM 9410 model has all the same features and ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SELF Self-Adjusting Floating Baffle System is designed to reduce floating debris from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin overflows. The ACU-SELF can also be installed in channels or culverts where floatables retention is ...
-
PremiumManufactured by AMS, Inc.based in USA
Probe up to 20' with extensions!: AMS extendible tile probes are made from high carbon stress relieved steel and are not plated. Designed for probing depths of 12' or more, they may also be used to prepare holes for insertion of small diameter soil or or gas vapor probes. At deeper depths, use an AMS slide hammer or compact slide hammer. Tile Probe Complete Includes: Base extension (3' or 4' ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples up to 4' in length. The 12" base section and three extra body sections allow you to assemble a sampler that is 12", 24", 36", or 48". in length. This kit was designed for soil sampling professional who wants the strongest, most durable ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Multi-Stage Soil Core Sampler allows you to collect soil core samples of various lengths! This stainless steel extendable soil core sampler collects 2" soil core samples up to 48" deep when the optional 12" multi-stage soil core sampler cylinder sections are attached. The complete multi-stage soil core sampler includes: Multi-Stage Soil Core Sampler base, solid cap, soil core tip, auger ...
-
PremiumManufactured by AMS, Inc.based in USA
A rubber coating makes it easy to grip, as well as significantly absorbing the impact shock. Pounds down for easy penetration, and then can be pounded up for tool ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLO Compact Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7 100 gpm (450 L/s) for upstream water levels varying from 0 to 26 feet (8 m). The TRU-FLO Compact Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by AMS, Inc.based in USA
With a variety of drills and adapters to choose from, you are sure to find the one to meet your specific job site ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you