Equipment in Croatia

576 Results found

Current filtering criteria

You can remove a filter by clicking on the x

KONCAR - Model ST&P - Shaft Torque and Power Monitoring System

by KONCAR - Electrical Engineering Institute Inc.     based in Zagreb, CROATIA

Torque, speed and power are the defining mechanical parameters associated with functional performance of rotating machines (machine efficiency determination). ST&P system enables insight into this important machine parameters by on line measurement of shaft twist angle. The system uses two precise optical fork sensors

HORIBA - Model D-50 Series - Handheld Water Quality Meter

by HORIBA Europe GmbH     Office in CROATIA

Revolutionary waterproof meter and electrodes enhance care-free operation in the lab or field.

HORIBA - Model HD-300 - Two-Wire Transmitter

by HORIBA Europe GmbH     Office in CROATIA

Membrane type polarography method. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor replacement.

Horiba - Model TPNA-500 - Automatic Total Nitrogen/Phosphorus Monitoring System

by HORIBA Europe GmbH     Office in CROATIA

More than 10 years have passed since the 5th Water Use Regulation was enforced in 2001. From the perspective on preservation of ambient water quality, it has become a matter of course for companies to be compliant with regulations and observe corporate compliance. Total nitrogen and total phosphorus monitoring in the future has the potential to ...

HORIBA - Model TPNA-300 - Automatic Total Nitrogen/Phosphorus Monitoring System

by HORIBA Europe GmbH     Office in CROATIA

Everything from precise measurement to reduced running costs. HORIBA-leading the world in practical environmental analysis technology will give a benefit for Total Nitrogen/Phosphorus monitoring. Total nitrogen, total phosphorus. To measure these two new targets in the 5th of Total Water Contaminants Regulation enforced in Dec. 2001 in Japan, the ...

HORIBA - Model HE-300R - Two-Wire Transmitter

by HORIBA Europe GmbH     Office in CROATIA

Accurate measurement of UPW resistivity. Well-examined temperature compensation function for UPW. Arbitrary setting of the compensation target temperature.   

HORIBA - Model SLFA-60 - X-ray Fluorescence Sulfur-in-Oil Analyzer

by HORIBA Europe GmbH     Office in CROATIA

HORIBA introduces the new standard of transportable sulfur-in-oil analyzers, the SLFA-60. This instrument introduces new software and hardware features to meet the growing changes in the petroleum industry. The instrument has expanded storage of calibration curves and data can be exported using USB output. The measurement range has increased to ...

HORIBA - Model CVS-ONE Series - Constant Volume Sampler

by HORIBA Europe GmbH     Office in CROATIA

The CVS-ONE series is designed for the measurement of diluted emissions from vehicles and engines. The new integrated operating platform, HORIBA ONE PLATFORM is adopted for the CVS-ONE. The hardware has been significantly downsized from previous designs, reducing test cell footprint requirements. It introduces new functions and is more ...

HORIBA - Model APDA-371 - Ambient Dust Monitor

by HORIBA Europe GmbH     Office in CROATIA

The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...

HORIBA - Model APOA-370 - Ambient Ozone Monitor

by HORIBA Europe GmbH     Office in CROATIA

The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of ...

HORIBA - Model APSA-370 - Ambient Sulfur Dioxide Monitor

by HORIBA Europe GmbH     Office in CROATIA

The APSA-370 is a device for the continuous monitoring of atmospheric SO2 using UV fluorescence. The APSA-370 employs an proprietary, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry-method, due to its minimal maintenance requirements capability of continuous monitoring and instantaneous ...

HORIBA - Model APMA-370 - Ambient Carbon Monoxide Monitor

by HORIBA Europe GmbH     Office in CROATIA

The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and ...

HORIBA - Model ZNV-7 - Zero Gas Generator

by HORIBA Europe GmbH     Office in CROATIA

HORIBA’s compact designed Zero Gas Generator ZNV-7 is used for mobile, stationary or laboratory scale zero point checking & diluting span gas sources for the calibration of ambient air analyzers.

HORIBA - Model OCMA-500 - Oil Content Monitor

by HORIBA Europe GmbH     Office in CROATIA

The OCMA-500 Oil Content Monitor has been redesigned for even better operability, maintaining its user-friendly features.After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The OCMA-500 cuts ...

HORIBA OpenPlex - Flexible Surface Plasmon Resonance Imaging System

by HORIBA Europe GmbH     Office in CROATIA

Designed to meet the demands of biologists, biochemists and biophysicists, the OpenPlex is a flexible surface plasmon resonance imaging system. OpenPlex is your companion for the development of label-free and multiplexed bio-assays and molecule detection. It is a robust and compact system designed for simple use and high versatility. Its open ...

HORIBA LAQUA - Model DS-70 Series - Benchtop Conductivity Meter

by HORIBA Europe GmbH     Office in CROATIA

LAQUA DS-70 series measures Conductivity, Resistivity, Salinity, TDS and Temperature simultaneously and the Model DS-72 complies with industrial pharmacopoeias standard (JIS, USP, EP, JP and CP). The meters’ auto diagnostic function allows the user to make sure that the instruments will always give high performance and reliable measurements. ...

HORIBA LAQUA - Model F-70 Series - Benchtop pH/Water Quality Analyzer

by HORIBA Europe GmbH     Office in CROATIA

The HORIBA LAQUA F-70 series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response ...

HORIBA - Model MEXA-ONE-QL-NX - Laser Spectroscopic Motor Exhaust Gas Analyzer

by HORIBA Europe GmbH     Office in CROATIA

HORIBA ONE Series Introduces New N-Compounds Analyzer. High accurate nitrogen compounds measurement system using QCL-IR method newly employs 'HORIBA ONE PLATFORM'. This system provides the usability and expandability for your test laboratories, as well as other HORIBA ONE series instruments.

HORIBA - Model VA-3000/VS-3000 - Multi-Component Analyzer

by HORIBA Europe GmbH     Office in CROATIA

From environmental monitoring to developing new energy sources and chemicals for the new era, gas analysis systems are faced with needs and challenges that have changed dramatically over time. Responding to these new needs, HORIBA has developed the VA-3000, the versatile gas analyzer that's ready for the future. A single analyzer is now capable of ...

HORIBA - Model SMA-371 - Datalogger

by HORIBA Europe GmbH     Office in CROATIA

The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...

Need help finding the right suppliers?

Let the XPRTs do the work for you