We couldn't find any heat exchangers equipment suppliers or service providers located in Cuba
Here is a list of equipment results with suppliers serving Cuba
Heat Exchangers Equipment Available In Cuba
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
A flue gas heat exchanger is part of the standard equipment for energy-optimised and environmentally friendly boiler operation. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 15% when using condensing technology - Intelligent ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
With the effective recovery of flue gas heat, you can save up to 14% on fuel and, at the same time, reduce emissions. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 14% when using an additional downstream condensing heat ...
-
Manufactured by Napier-Reid Ltd.based in CANADA
Time tested and trusted for the critical application of heating or cooling digester sludge. Napier-Reid has emerged as a leading manufacturer of sludge heat exchangers for municipal and industrial wastewater treatment ...
-
Manufactured by Claro Incbased in CANADA
Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge energy transfer. Claro modular tube-in-shell heat exchangers, large gap heat exchangers, and Big Bubble Gun Mixers with heating ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
FLUE GAS HEAT EXCHANGER TRANSFERS EXHAUST GAS HEAT TO ENERGY: Implementing a flue gas heat exchanger to capture exhaust gas and to transfer the heat to different energy consuming part of your installation, saves not only energy but also saves money. Moreover, it is a very sustainable way to ...
-
Manufactured by Elgressy Engineering Services Ltd.based in ISRAEL
The SCP (Scale Crystallization Prevention) is an electrolytic system that prevents scale deposition, reduces and removes chlorine and bacteria from the water, and substantially reduces corrosion rates. The SCP is connected externally to the heat exchange unit and needs no complicated installation procedures or changes to your existing ...
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Our double-pipe heat exchanger is used to efficiently heat sludge at biogas and waste water treatment plants. Using the counter-flow principle, sludge is heated evenly, and flows back to the process. Our WT is custom-designed, manufactured entirely in stainless ...
-
Manufactured by Equirepsa, S. A.based in SPAIN
EQUIREPSA designs and manufactures condensers, not only as a part of our own vacuum systems, also for a variety of industrial applications. One type of tube and shell heat exchangers are the Surface Condensers. These are equipment that condense vapors without contact between the fluids. The heat exchange is produced through a ...
-
Manufactured by Bridge12 Technologies, Inc.based in USA
. However, the lowest temperature that these devices typically can achieve is about -90ºC (183 K). To achieve lower temperatures typically a dry nitrogen gas stream that is cooled in a heat exchanger using liquid nitrogen (LN2) is ...
-
Manufactured by Claro Incbased in CANADA
Claro designs and manufactures two proprietary heat exchangers that heat, cool, and recover energy by means of sludge-to-sludge energy transfer. Claro twin modular tube-in-shell or large gap heat exchangers can suit a wide variety of applications and footprints. Claro heat ...
-
Manufactured by WSA Engineered Systemsbased in USA
The deposit of fine matters, such as sand, silt, mud, as well as dead organic matters reduce the flow through the heat exchanger and interfere with the designed water distribution and flow pattern, as well as the required water velocity between the plates. Clogging of the water inlet nozzles by large matters such as twigs, stones, seaweed, ...
-
Distributed by Holtec Internationalbased in USA
Holtec’s component cooling water heat exchangers (CCWHX), designed and fabricated to the highest quality standards, efficiently reject heat, maintaining critical equipment and plant temperature ...
-
Manufactured by Pentair - Hoffmanbased in USA
Capacities ranging from 870 watts to 6700 watts. Filterless design. NEMA power cord connection standard. Copper pipe and aluminum fins heat exchanger core. Air movers with thermal protection. Regulating mechanical thermostat set at 35 C (95 F), differential of 4 C (7 F). Operating temperature from 10-50 C (50-122 F). Solenoid water valve. ...
-
Manufactured by Pentair - Hoffmanbased in USA
Unique counterflow aluminum core for high-efficiency and high-performance heat transfer, except for the XR20 and XR29-08 which use a modified heat pipe core. Models for 115 and 230 VAC power input. UL Listed or Recognized to save customers time and money with agency approvals. Operating temperature range from -20 F/-29 C to 140 F/60 C. ...
-
Manufactured by ITM Heat Transferbased in SPAIN
retrofitted, and new plants alike are installing corrugated tube heat exchangers in an effort to reduce energy consumption, and so improve operating ...
-
Manufactured by Water-Gen Ltdbased in ISRAEL
At the heart of the Watergen product line is the revolutionary GENius™ heat-exchange technology, a game-changer that turns air into pure drinking water, in the most efficient way possible. With unique patented design and non-conductive structure, GENius is the world’s most energy-efficient atmospheric water generator (AWG) ...
-
Manufactured by Weinreich Industriekühlung GmbHbased in GERMANY
Air-cooled water-heat exchanger-machines build up compact ,to be set up inside with a cooling capacity from 20 to 500 kW, hall-heating-system/ acclimatisation through air ducts (> 500 kW with ...
-
Manufactured by Weinreich Industriekühlung GmbHbased in GERMANY
Air cooled water cooling machines in compact design for outdoor installation, with a cooling capacity from 20 to 500 kW, (> 500 kW with ...
-
Manufactured by Weinreich Industriekühlung GmbHbased in GERMANY
Air-cooled water-heat exchanger-machines in compact construction to be set up inside with a cooling capacity from 1 to 100 kW, (> 100 kW with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you