Oxygen Measurements Equipment In South Africa
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Our new O2-Lumitrode is an optical sensor for the determination of dissolved oxygen in water or other liquid samples. Compared with conventional, galvanic sensors, the O2-Lumitrode is much easier to handle and has a longer service life. In addition, this optical sensor is completely maintenance-free. The measuring optics of the ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
A component that has proved itself time and again over 4 decades, the DW1 electrode chamber offers quality and versatility in measurements of dissolved oxygen. Developed in conjunction with the great Prof. David Walker, the DW1 provides a highly flexible solution for a wide range of applications covering both teaching and research in ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
The LH36/2R light housing is designed specifically for use with the DW3 chamber. The light housing mounts directly on to the larger optical port of the DW3 and is held securely in ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
A LED1 high-intensity light source in one of three colours is supplied with the Chlorolab 2+ system. The different light sources that can be supplied are as ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
Since its original design in the early 1970s by Tom Delieu and David Walker, the S1 Clark-type oxygen electrode disc remains largely unchanged – a true testament to the quality and reliability of the sensor. The S1 consists of a platinum cathode and silver anode set into an epoxy resin disc and is prepared for use by trapping a layer of ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
The Quantitherm consists of the QRT1 handheld display unit combined with the QTP1+ probe sensor. For use as a calibration tool for the LS2 light source, the QTP1+ probe connects directly to the QRT1 control unit allowing real-time measurement of light intensity via the built-in screen. The light intensity of the LS2 Light source ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
The OXYV1 Oxyview control unit has been designed as a convenient, low-cost oxygen electrode control unit for teaching studies of photosynthesis and cellular respiration using the oxygen electrode measurement technique. The Oxyview control unit is fully compatible with the range of oxygen electrode chambers produced by Hansatech ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
The Oxygraph Plus oxygen electrode system provides PC control of oxygen uptake or evolution measurements across a broad range of applications from studies of mitochondria and cellular respiration to measurements of isolated chloroplast suspensions in photosynthesis research applications with up to 100% oxygen ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
44pppp[[[[[[[[hghhnnnnnnnhhjjjjjjjjjjki0iimjmjjjjjjjjjjjjbbggrrh,,,kk;l;--999The Oxyview 1 liquid-phase oxygen electrode teaching system has been designed in response to the evjkkjjjkkker-increasing demand for a low-cost system for teaching photosynthesis and respiration measurements using oxygen electrode techniques. The system is ...
-
Manufactured by Hansatech Instruments Ltdbased in UNITED KINGDOM
The LD1/2 leafdisc electrode chamber is a simple device for measuring oxygen exchange from a 10cm2 leafdisc mounted within a sealed, gas-tight ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Sensor for the measurement of dissolved oxygen in the ppm range in water treatment technology. Precise oxygen measuring cell with integrated temperature measuring. Automatic monitoring of diaphragm integrity and electrolyte exhaust. Easy calibration, excellent life time (up to 2 years of operation between ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
100% oxygen-free medium for validation, calibration and adjustment of oxygen measuring points. COY8 is a ready-made gel that allows you to detect the true zero point of your oxygen and chlorine sensors. Thus, you can improve the reliability and accuracy of your measuring points and, hence, the quality and yield ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Liquiline Mobile CML18, the multiparameter handheld that fits in every shirt pocket. Mobile device for pH/ORP, conductivity, oxygen and temperature measurement in all ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS511, manufactured by Sensorex, is a submersible, rugged, low-maintenance sensor that senses dissolved oxygen in a medium (typically water). It consists of a self-polarizing galvanic cell that generates a millivolt signal proportional to the amount of oxygen present in the measured medium (typically ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens amperometric oxygen sensor for standard, hygienic and sterile applications. The Oxymax COS22D safeguards your products, process and plant equipment from oxygen influences. It measures reliably over a wide range helping you to better monitor and control your applications. The sensor is low-maintenance and ensures long-term stability - ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Portable device for pH/ORP, conductivity, oxygen and temperature measurement in all industries. With Liquiline To Go CYM290 you get the information you need, where you need it. The robust multiparameter handheld enables you to control any measuring point in your plant with the identical Memosens sensors that you use in your ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Portable device for pH/ORP, conductivity, oxygen and temperature measurement in all industries. With Liquiline To Go CYM291 you get the information you need, where you need it. The robust multiparameter handheld enables you to control any measuring point - even in hazardous areas - with the identical Memosens sensors that you use in your ...
-
Distributed by N&Z Instrumentsbased in SOUTH AFRICA
Industrial boilers and furnaces are large consumers of fuel and can also cause excessive environmental pollution. Continuous measurement of oxygen concentration in combustion exhaust gases can improve fuel efficient and minimise environmental impact. Fuji, a long-standing manufacturer of gas analysers, supplies a low-cost and user friendly ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you