Equipment in Tanzania

175 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Sewage Gas Cogeneration / Combined Heat & Power

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Wastewater professionals once accepted the high costs of operating wastewater treatment facilities as a consequence of meeting their discharge permit requirements. As the cost of energy rises and emphasis on renewable energy increases, local authorities and municipalities are seeking solutions that save money and meet renewable requirements. GE ...

Electricity Peaking Stations

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid.

Residential Cogeneration / Combined Heat and Power (CHP)

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries ...

GE - Model APG - Associated Petroleum Gas / Flare Gas

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator ...

Hot and Tropical Countries

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Hot and tropical counties can pose challenges for the operation of the generator. If the generator exceeds certain temperature limits de-rating will occur. In order to overcome the challenge of high ambient temperatures the generator enclosure or container must be correctly engineered to ensure that the generator is adequately cooled. In addition ...

Steel Production Gas & Cogeneration / Combined Heat & Power

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced ...

Waste Exhaust Heat Boilers

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for utilisation in a waste heat ...

GE Jenbacher - Model Type-6 - Gas Engine

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

Electricity from Gas-Powered Generators

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion

Cogeneration / Combined Heat & Power Systems (CHP)

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national ...

Remote Combined Heat and Power Generation

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs.  Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or ...

GE Jenbacher - Model Type-2 - Gas Engine

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

The GE Jenbacher Type-2 engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at two levels of electrical output either 249kWe or 330kWe.

Model CMM - Coal Mine Methane

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to atmosphere.

GE - Cogeneration Module Configuration

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the 

Island Mode Operation Captive Power Plant

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution network.

GE Jenbacher - Model 920 - Gas Engine

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

As the only gas engine specialist offering small and large engines, GE  is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a ...

GE Jenbacher - Model Type-4 - Gas Engine

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and availability.

Quadgeneration Systems

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Quadgeneration systems are some of the most advanced gas engine driven power plants in the world. Quadgeneration encompasses the features of a trigeneration system, with combined electricity, heat and cooling but in addition includes the recovery of carbon dioxide from the exhaust gas. This carbon dioxide is scrubbed and can be used in industrial ...

Absorption Chillers

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide.

LEANOX - Lean-Mixture Combustion Control System

by Clarke Energy     Office in Dar-Es-Salaam, TANZANIA

LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine operation.

Need help finding the right suppliers?

Let the XPRTs do the work for you