filtration technologies equipment in Michigan

  • Premium

    Bright Technologies - Belt Filter Presses

    The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Belt Filter Presses Product line

  • Premium

    Bright Technologies - Skid Mounted Belt Filter Press Systems

    Bright Technologies offers complete belt filter press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of operation.

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Skid Mounted Belt Filter Press Systems Product line

  • Premium

    Bright Technologies - Mobile Belt Filter Presses

    Open Trailer Mounted BFP System Benefits: Pre-Engineered for Reliable Operation. Fully Integrated Components for Ease of Control. Service Multiple Locations. Set Up in About 3 Hours. Good Choice for Contract Dewatering. BFP Sizes Offered from 0.8 to 2.2 Meter. Less Expensive than Enclosed Trailer Design. Small Units Available with Pintle or 5th ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Mobile Belt Filter Presses Product line

  • Climate - Powered Filtration Unit

    The capture of dust, dander, smoke particles, even bacteria is essential for good indoor air quality. Most air filters only take out larger particles. The EPA is especially concerned about particles that are 10 micrometers in diameter or smaller which 'can get deep into your lungs, and some may even get into your bloodstream.' More than 95% of the ...

    By Climate Technologies Corp. based in Farmington Hills, MICHIGAN (USA). from Powered Filtration Unit Product line

  • Fusion Vortex - Comprehensive Filtration System

    The Fusion Vortex creates a plant-wide environmental vortex to capture and clean dirty air. This system is ideally suited for facilities where source capture of smoke or dust is difficult due to unusual manufacturing operations or when there are overhead cranes or limited ceiling space. By turning the entire facility’s air at a consistent ...

    By RoboVent based in Sterling Heights, MICHIGAN (USA). from Comprehensive Filtration System Product line

  • Needle Felt Filter Bags

    Needle felt filter-bags are the most economical disposable filter material available. They provide depth filtration and surfaces free of fiber migration while utilizing hot melt seamless welding technology to ensure effective filtration and no-bypassing. They are best suited for low and medium viscosity liquids and are available in a wide range of ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Needle Felt Filter Bags Product line

  • Climate - Gas Phase Media

    Certain environments demand the removal of gaseous pollutants and toxins from the air that can best be achieved with gas phase filtration.

    By Climate Technologies Corp. based in Farmington Hills, MICHIGAN (USA). from Gas Phase Media Product line

  • Filtra-Systems - Verti-Press Filter (VPC)

    The Verti-Press Filter (VPC) is the next generation of automatic pressure filtering technology. The VPC does not clam shell open and close, instead it uses patented pneumatic seals to seal the chamber off during filtration. Once filtration is complete, compressed air forces the remaining liquid through the filter media, which removes contaminants ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Verti-Press Filter (VPC) Product line

  • CeraGuard - Water Purification System

    6 Stages of water purification in 3 replaceable filter modules designed to reduce the widest range of contaminants without wasting a drop of water. Available as a micro-filtration system with AquaCera ceramic filter module or as a complete :  purifications system with AquaCera Hollow Fiber technology to reduce bacteria virus, cysts, colloids, ...

    By Ceramic Filters Company, Inc. (CFCI) based in Brooklyn, MICHIGAN (USA). from Water Purification System Product line

  • Filtra-Systems - Verti-Press Automatic Tower Filter Press

    Leading the filtration systems industry, Filtra-Systems is proud to offer the most advanced dewatering tower filter press available on the market today.  Available in different sizes to match your organization's needs, our automatic filter press is capable of meeting the needs of modern industrial processes.  Commonly a replacement for ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Verti-Press Automatic Tower Filter Press Product line

  • Model T6-4P3-BB - Nitrogen Generator Membrane

    GCS, Inc. engineer, design, and manufacture nitrogen generator membrane systems using PRISM membranes, the industry leader in membrane separation technology.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA). from Nitrogen Generator Membrane Product line

  • High Efficiency Cooling Tower Treatment System

    NO Sulfuric acids or hazardous chemicals. Mitigates scale, corrosion and bio‐fouling with reduced bleed of tower water or chemicals. “New Dimension” cooling technology permits operation at higher cycles. NO MORE complicated traditional chemical index programs, controls, chemicals and excessive tower blow down. It doesn't get any ...

    By Dancorp Inc. based in Edwardsburg, MICHIGAN (USA).

  • Tri-Flow - Industrial Pleated Filters

    Tri-Flow industrial pleated filters for submicron particulate and fumes deliver performance virtually identical to a HEPA filter. They are a superior alternative to bag filters, traditional cartridge filters, and pocket filters for a broad range of applications. Tri-Flow pleated filters have a MERV 16 rating and deliver filtration efficiencies of ...

    By Tri-Mer Corporation based in Owosso, MICHIGAN (USA).

  • RoboVent CrossFlow - Model Table - Compact, Self-Contained Welding Bench and Source Capture System

    The RoboVent CrossFlow Table is a compact, self-contained welding bench and source capture system that recycles contaminated air using a high-efficiency, self-cleaning filter system. Available in compact 4’ or more spacious 5’ models, the CrossFlow Table is a complete welding station that is ideal for educational facilities or repair ...

    By RoboVent based in Sterling Heights, MICHIGAN (USA). from Compact, Self-Contained Welding Bench and Source Capture System Product line

  • Filtra-Systems STiR - Industrial Water Filter

    Filtra-Systems has been providing industrial manufacturers with the best in water filter technology for over three decades. Our patented STiR fluidization technology has been validated in production and mathematically proven to clean 100% of the filter media during each backwash cycle. This effectiveness makes the STiR unmatched among industrial ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Industrial Water Filter Product line

  • Premium

    WesTech STM-Aerotor™ - Biological Nutrient Removal (BNR) Package Plant

    The STM-Aerotor™ Biological Nutrient Removal (BNR) Package Plant uses Activated Sludge and Fixed Film technology as part of a process that provides biological nutrient removal for municipal wastewater treatment.

    By WesTech Engineering, Inc. Distributor in Howell, MICHIGAN (USA). from Biological Nutrient Removal (BNR) Package Plant Product line

  • Nutrient Concentration & Water Reclamation System

    Digested Organics has developed an exclusive ultrafiltration (UF) and reverse osmosis (RO) solution for manure nutrient concentration and water reclamation in partnership with one of the world’s leading innovators in solids filtration and separation. The Nutrient Concentration & Water Reclamation (NCWR)™ System can process raw ...

    By Digested Organics LLC based in Ann Arbor, MICHIGAN (USA).

  • CNC Machine Tool Coolant Mist Collector

    The First Stage Centrifugal Separator uses Filtra-Systems patented 'At The Machine' technology. Centrifugal separation is used to remove oil mist from air. Droplets are then gravity-drained back into the machine tool, decreasing coolant losses (and reducing the cost of make-up coolant). Unlike other centrifugal oil mist collectors, there are no ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from CNC Machine Tool Coolant Mist Collector Product line

  • Premium

    WesTech - Buoyant Media Clarifier

    The Buoyant Media Clarifier represents the latest technology in clarification solutions. The Buoyant Media Clarifier contains a floating bed of filter media which acts to clarify the overflow. Overflow clarities of 20ppm have been achieved in applications where conventional clarifier technology failed to achieve 120ppm. The Buoyant Media Clarifier ...

    By WesTech Engineering, Inc. Distributor in Howell, MICHIGAN (USA). from Buoyant Media Clarifier Product line

  • Filtra-Systems - Walnut Shell Media Filter

    Filtra-Systems innovative Deep Bed Walnut Shell Media Filter has overcome the limitations of conventional bed type industrial water filters by leveraging a maximum efficiency regeneration design. This media regeneration is achieved using the kinetic model of a Continuous Stirred-Tank Reactor (CSTR), which makes the backwash the most efficient, ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Walnut Shell Media Filter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you