Apogee Environmental Industry Equipment In Oregon
-
Manufactured by Apogee Instruments, Inc.based in USA
The SI-121 is an un-amplified analog sensor with a voltage output. The sensor has a 18° half-angle field of view and a response time of 0.6 seconds. Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface (soil, vegetation, water, snow) temperature ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The PS-300 measures a wavelength range of 300 to 1000 nm. The spectroradiometer comes in a complete package ready to connect to your computer and begin making measurements. Typical applications include measurement of spectral output (energy flux density, photon flux density, or illuminance) of different radiation sources (often for plant or human lighting), and reflectance and transmittance ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The TS-100 is the shield only model of Apogee's Fan-aspirated Radiation Shield. The unique aerodynamic shape and rugged, low-power fan make it the first research-grade fan-aspirated shield that is practical for use on batter or solar powered stations. The shield provides excellent sensor protection and accommodates various combinations of thermistors, PRTs, and humidity probes using one of the ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SO-110 has a standard response time of 60 seconds and is designed for use in soil applications. It comes with a thermistor temperature sensor to correct for temperature changes and a restive heater to raise the temperature of the membrane approximately two degrees above ambient temperature to keep condensation from occurring on the Teflon membrane and blocking the diffusion path of the ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SS-110 measures a wavelength range of 340 to 820 nm. The spectroradiometer is an easy-to-use, cost-effective, versatile spectral measurement system that can be interfaced to a computer. Typical applications include measurement of spectral output (energy flux density, photon flux density, or illuminance) of different radiation sources (often for plant or human lighting), and reflectance and ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The new SQ-420 smart quantum sensor can be connected directly to a computer for taking spot measurements or graphing and datalogging real-time PPFD using the included software. The sensor can also act as a stand-alone PAR datalogger by simply connecting it to any standard 5 V DC USB power plug. Internal memory within the sensor head is capable of storing 10,000 user-specified periodic ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SL-610 is a downward-looking thermopile pyrgeometer. The sensor incorporates a filter, blackbody thermopile detector, and thermistor with a rugged, self-cleaning sensor housing design. Typical applications include longwave radiation measurement in agricultural, ecological, and hydrological weather networks and renewable energy applications. ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SL-510 is an upward-looking thermopile pyrgeometer. The sensor incorporates a filter, blackbody thermopile detector, and thermistor with a rugged, self-cleaning sensor housing design. Typical applications include longwave radiation measurement in agricultural, ecological, and hydrological weather networks and renewable energy applications. ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MO-200 is designed to measure 0 to 100 % oxygen and is connected to a hand-held meter via cable that displays and stores measurements. The wide measurement range allows it to be used for applications either in the soil or in the lab with the diffusion or flow-through head accessories. The sensor is housed in a polypropylene body and electronics are fully potted. Typical applications include ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MI-2H0 has a hand-held meter, attached via cable, that displays and stores sensor measurements. The unique geometry of the sensor gives a wide 32° half-angle field of view in the horizontal direction with a 13° half-angle field of view in the vertical direction. This enables the user to mount the sensor at shallower angles without seeing above the horizon while maximizing the area measured. ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SI-1H1 is an un-amplified analog sensor with a voltage output. The unique geometry of the sensor gives a wide 32° half-angle field of view in the horizontal direction with a 13° half-angle field of view in the vertical direction. This enables the user to mount the sensor at shallower angles without seeing above the horizon while maximizing the area measured. The sensor has a response time of ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MI-220 has a hand-held meter, attached via cable, that displays and stores sensor measurements. The sensor has a 18° half-angle field of view and a response time of 0.6 seconds. Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface (soil, ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SB-100 combines excellent performance in a small package size at an affordable price. The sensor works well as a stand-alone product or to combine it with sensors affected by barometric pressure, such as our line of oxygen sensors. Typical applications include pressure measurement in weather networks, often for weather forecasting and to correct the output of sensors that are sensitive to ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SI-111 is an un-amplified analog sensor with a voltage output. The sensor has a 22° half-angle field of view and a response time of 0.6 seconds. Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface (soil, vegetation, water, snow) temperature ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The ST-100 is a high accuracy thermistor (± 0.1 C from 0 to 70 C), mounted in a waterproof housing, designed for continuous measurement of air, soil, or water. ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SU-100 is an un-amplified analog sensor with a voltage output. The sensor incorporates a photodiode that measures combined UVA and UVB radiation. Typical applications include UV radiation measurement in outdoor environments (sensor is not recommended for long-term continuous outdoor deployment), laboratory use with artificial light sources (e.g., germicidal lamps), and monitoring the filter ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SI-131 is an un-amplified analog sensor with a voltage output. The sensor has a 14° half-angle field of view and a response time of 0.6 seconds. Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface (soil, vegetation, water, snow) temperature ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SIF-1H1 is a fast response model infrared radiometer with a 0.2 second response time. The analog sensor is un-amplified and has a voltage output. The unique geometry of the sensor gives a wide 32° half-angle field of view in the horizontal direction with a 13° half-angle field of view in the vertical direction. This enables the user to mount the sensor at shallower angles without seeing above ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MU-100 has a sensor integrated into the top of the hand-held meter, which displays and stores measurements. The sensor incorporates a photodiode that measures combined UVA and UVB radiation. Typical applications include UV radiation measurement in outdoor environments (sensor is not recommended for long-term continuous outdoor deployment), laboratory use with artificial light sources (e.g., ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MQ-210 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware. The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings. The meter consists of a waterproof quantum sensor attached via ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you