Equipment in Tennessee

1284 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Myron L - Model RO Meters™ - Reverse Osmosis Meters for Measuring Total Dissolved Solids

by Myron L Company     Distributor in TENNESSEE (USA)

The choice of professionals for years, this compact instrument has been designed specifically to demonstrate and test Point of Use (POU) reverse osmosis or distillation systems. By measuring electrical conductivity, it will quickly determine the parts per million/Total Dissolved Solids (ppm/TDS) of any drinking water. With a single “before ...

Tekran - Model 1306 - Water Filtration System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of ...

Tekran - Model 3310 - Elemental Hg Calibration Unit

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 3310 Elemental Mercury Calibrator allows high level mercury monitoring systems to be accurately calibrated using elemental mercury. It integrates seamlessly with the Tekran' Series 3300 speciating CEM, however it can also be used as a stand-alone mercury calibration system. The calibration source allows both multi-point ...

Tekran - Model 1135 - Particulate Mercury Unit

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended ...

Tekran - Model 1100 - Zero Air Generator

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero air filters. The Model 1100 eliminates the need of compressed gas ...

Tekran - Model 2537X - Automated Ambient Air Analyzer

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean ...

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Tekran - Model 3321 - Oxidizer Module

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 3321 Wall Mounted Sample Conditioner can be configured to supply Ionic Mercury Calibration Gas to the 3300Xi Hg CEM system. The calibration source allows both multi-point calibrations and standard additions to be automatically initiated. The unit generates concentrations of ionic mercury by oxidation elemental Hg output from the ...

Tekran - Model 2750 - Methyl Mercury Distillation System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

Tekran Instrument Corporation introduces the new Tekran Model 2750 Methyl Mercury Distillation System. The Tekran 2750 is designed to be compact and modular, reducing the required bench top footprint and scaling to your particular sample throughput. The system features a precision controlled aluminum heating block, and actively cooled water bath, ...

Tekran - Model 2700 - Automated Methyl Mercury Analysis System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 2700 Methyl Mercury Analysis System offers an automated solution for complex and time consuming manual techniques. The 2700 is a fully-integrated, gas chromatography, cold-vapor atomic fluorescence spectrophotometer (GC-CVAFS). The 2700 can analyze distilled waters, extracted or distilled tissues and solids, and allows direct analysis ...

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

Tekran - Model 3342 - Sample Probes & Conditioning

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

Tekran - Model 1130 - Oxidized Mercury Speciation Module

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model ...

Tekran - Model 2600-NG - Mercury Analyzer for Natural Gas and Industrial Hygiene

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector ...

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran Mode - Model 2500 - Cold Vapor Atomic Fluorescence Spectrophotometer (CVAFS) Mercury Detector

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Model 2500 is a Cold Vapor Atomic Fluorescence Spectrophotometer (CVAFS) elemental mercury detector. The advantages of atomic fluorescence over more traditional atomic absorption (AA) techniques are well known. They include: very high sensitivity, superior immunity to false positive responses, and inherent linearity.

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

Tekran - Model Series 2600 - Flow Based Configuration Automated Sample Analysis System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 2600 Automated Total Mercury Analyzer allows analysis of a wide range of environmental matrices. The instrument has a modular design with unique “Top Deck” components allowing fast user switching between analytical methods such as EPA 1631, EPA 245.7, and EPA IO-5. The Tekran 2600 utilizes a CVAFS detector capable of ...

Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2505 mercury vapor calibration unit was designed to provide a traceable external standard to audit the Tekran 2537 internal mercury calibration source. However, the Model 2505 provides an accurate and reproducible means of injecting a known quantity of elemental mercury vapor into any analytical system. Since the saturation vapor ...

Tekran - Model 2600-IVS - Automated Sample Analysis System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis.

Need help finding the right suppliers?

Let the XPRTs do the work for you