Thermoplastic equipment in USA

  • Thermoplastic - Primeweld Plastic Welding Rods

    The most important element to successful thermoplastic welding is the filler rod. To insure proper bonding, it is essential that filler rods be made with the same high grade resins used in the material being welded.

    By Thermoplastic Processes based in Georgetown, DELAWARE (USA). from Primeweld Product line

  • Electronic Materials

    Novomer polypropylene carbonate (PPC) is a revolutionary low temperature sacrificial material which enables innovative solutions for the most pressing challenges faced by the microelectronics and MEMS industries. Used in conjunction with conventional processes, PPC applications include microstructure formation, wafer level MEMS packaging and ...

    By Novomer Inc. based in Waltham, MASSACHUSETTS (USA). from Thermoplastics Product line

  • Premium

    EPT XtrmPly™ - Model TPU - Thermoplastic Polyurethanes Polymer

    EPT's XtrmPly Thermoplastic Polyurethanes (TPU)are offered in both Ether and Ester versions. Ether based products are ideal when exposed to water while Ester based products provide excellent resistance to petroleum, hrydrocarbons, and wide variety of chemicals. So whether you are containing Potable (NSF61) or Non-Potable Water, hydro carbon ...

    By Engineered Polymer Technologies (EPT) based in Hillside, NEW JERSEY (USA). from Polymer Products Product line

  • Premium

    Reinforced Thermoplastic Composites

    RTC is ideal for interior panels as well as semi-structural parts. Typical application areas are in transportation, marine and building sectors.

    By Ahlstrom-Munksjö Office in Madisonville, KENTUCKY (USA). from Transportation - Automotive Interiors and Reinforcements Product line

  • Premium

    E-D Plex - Thermoplastic Rubber Flexible Tubing

    ED-Plex is a thermoplastic elastomer combining the chemical and environmental resistance of EPDM with polypropylene.  Applications include pumping acid and base solutions as well as adhesives, inks and paints.  Customers using ED-Plex to pump hydrocarbon based liquids should test the tubing prior to use. With a working temperature range ...

    By Randolph Austin Company based in Manchaca, TEXAS (USA). from Extruded Tubing Product line

  • Model 2-1/2 - Two-Piece Compact Ball Valve

    Factory sealed, maintenance-free, quarter-turn ball valves for 2-1/2, 3, and 4' piping systems.

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Valve Actuation

    Automation is an ideal solution for precise control of many valves in a system. When valves are remotely located, or the process requires constant monitoring and adjustment, actuation is the solution. Pneumatic and electric actuators can be easily fitted on our ball, multi-port, and butterfly valves. Some features and functions include normally ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model Super C - Compact Ball Valve

    When compared with other brands of compacts, the Colonial Super C is in a class by itself. It utilizes the same ball and stem as our True Union valve. This means it has the same robust stem diameter and two stem o-rings as the True Union. It is the only compact valve with a separate and independent floating carrier. This provides the valve with ...

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model 801 Series - True Union Ball Valve

    Designed for swimming pool, pond, irrigation, and other water applications with low concentrations of chlorine or other chemical additives. The dimensional chart on this brochure has been updated for the MKIII series, which feature “Colonial III” molded on the handle.

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Specialty Valves

    IPEX offers several specialized valves for a variety of process requirements. Sediment strainers trap suspended particles flowing in the process line, ensuring that downstream components are protected. Solenoids are ideal for high-cycle applications where remote operation and precise control are important. Lab cock valves are an economical ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Check & Vent Valves

    Check valves should be used whenever there is a need to prevent back-flow of process media. This may be when two incompatible fluids cannot be allowed to mix, or when reverse flow would cause undesirable drainage of a system line or tank. Many styles exist including: simple ball checks, heavy duty swing checks, and highly efficient piston checks. ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model MARK III - PVC / EPDM - Single Union Ball Valve

    Single Union Ball Valves are an economically priced solution for water treatment, pool/spa, and commercial plumbing applications. The MARK III TYPE replaces older versions of the White SUBV. The numeral III appears on the handle after the Colonial Name. The part numbers in this series remains unchanged.

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Butterfly Valves

    These highly versatile valves can be used for simple on/off service but also for processes requiring precise throttling. End-of-line installation of the lugged version allows for downstream piping disassembly with the upstream system still under pressure. The extensive size range and material availability make them applicable in a wide range of ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Full Block - Model 101N Series 1/2 -4 - True Union Ball Valve

    Colonial’s True Union ball valves are premium quality and ideally suited for the most demanding industrial, commercial, agricultural and irrigation environments. Four different body materials and two different o-ring materials are available. A patented polymeric locking strip allows safe operation even when installed in the reverse ...

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Ball Valves

    Ball valves are generally used for on/off service, but can range from simple molded-in-place construction to high-end industrial designs with many features and benefits. Multi-port ball valves allow for mixing, diverting, and bypassing flow. Extensive material options provide for complete chemical compatibility in highly corrosive processes. Many ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • IPEX - Diaphragm Valves

    Diaphragm valves are the perfect solution when precise flow throttling is required. The weir style design - no dead space in the valve - is extremely good for abrasive slurries. These valves are widely used in high purity applications because their design prevents friction and subsequent particle creation when cycling. Many body and diaphragm ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model 050N Series - Commercial True Union Ball Valve

    The Commercial (050N) Series answers the need for a high quality, economically priced, true union ball valve for use in industrial, water treatment, pool/spa, and commercial plumbing applications. Available in 1/2 – 4” sizes.

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model VPS 25 - Replacement Cartridges for Colonial Full Block True Union Ball Valves

    The environmentally-friendly option that saves you time and money: When it’s time to replace the cartridges of existing, installed valves, VCRs alleviate the need to purchase and then dispose of new union nuts and end connectors. Reduced weight saves on shipping cost.

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Model SCH-80 - Commercial MIP Compact Valve

    MIP Compact Valves answer the need for an economically priced compact quarter turn ball valve for use in irrigation, water treatment, pool/spa, and commercial plumbing applications. Available in 1/2 - 4” sizes

    By Colonial Engineering Inc. based in Portage, MICHIGAN (USA). from Thermoplastic Valves Product line

  • Warco - Model M3 Filters - High Capacity Filter Vessels

    WARCO High Capacity Filter Vessels are made with the highest level of engineering and quality. Design pressures are available to 2220 psig with sizes to meet almost any flow requirement. With their superior solids holding most users prefer horizontal vessels when using WARCO 60' or 80' High Capacity Filters. WARCO vessels are available as skid ...

    By Warco, Inc. based in Wood Dale, ILLINOIS (USA). from Thermoplastic Filtration Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you