Carbon Dioxide Equipment In Vietnam
-
Manufactured by TSI Incorporatedbased in USA
The INSPECTAIRâ„¢-CO2 Carbon Dioxide Monitor is a compact, hand-held instrument which accurately measures carbon dioxide concentrations over a wide range. High precision, repeatable and reliable measurements up to concentrations of 5 percent (50,000 ppm) CO2 are attained using our proven Non-Dispersive Infra-Red (NDIR) sensor ...
-
Manufactured by Onset Computer Corporationbased in USA
The Telaire 7001 handheld carbon dioxide sensor features patented Absorption Infrared technology. Each sensor measures CO2 and temperature and can calculate and display real-time ventilation rates. When combined with the HOBO U12 or ZW Series it can record CO2, and when connected to an analog input on a H22, RX3000, or U30 Series it can ...
-
Manufactured by Vaisalabased in FINLAND
The Vaisala CARBOCAP® MGP262 continuously measures the methane concentration in offgas from your biogas upgrading unit to keep you from letting your profits go up in the air. ...
-
Manufactured by Vaisalabased in FINLAND
Get more value out of waste by improved decision-making, and by reducing your operating costs. Vaisala CARBOCAP MGP261 Multigas Probe for Methane, Carbon Dioxide and Humidity helps in improving your process and in protecting the Combined Heat and Power (CHP) engine. The MGP261 probe is compact in size, Ex certified, and can be installed ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a greenhouse or nursery, to insure optimal plant ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CPEC306 with EasyFlux® is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmospheric-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
Campbell Scientific’s EC150 is an open-path analyzer specifically designed for eddy-covariance carbon and water flux measurements. As a stand-alone analyzer, it simultaneously measures absolute carbon-dioxide and water-vapor densities, air temperature, and barometric pressure. With the optional CSAT3A sonic anemometer head, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AP200 is a complete, integrated CO2 and H2O atmospheric profile system. It measures carbon dioxide (CO2) and water vapor (H2O) concentration from up to eight intakes, which are normally spaced along the height of a tower to give a vertical profile. The AP200 is often used in conjunction with an eddy-covariance system to measure the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CPEC310 with EasyFlux® is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmospheric-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CSAT3BH is ideal for stations that are deployed in cold climates. The easy-to-use CSAT3BH sonic anemometer features smart heating that delivers just the right amount of heat to keep the instrument free of ice and snow, enabling continuous and reliable measurements in cold environments. The CSAT3BH is designed to prevent ice accumulation on the sensor, avoiding prolonged periods of data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
Campbell Scientific’s IRGASON fully integrates the open-path analyzer and sonic anemometer. Designed specifically for eddy-covariance carbon and water flux measurements, the patented design is easier to install and use than separate sensors and provides increased measurement accuracy. The IRGASON simultaneously measures absolute ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The KH20 is a highly sensitive hygrometer designed for measurement of rapid fluctuations in atmospheric water vapor, not absolute concentrations. It is typically used together with a CSAT3B in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
Campbell Scientific’s CSAT3B 3-D Sonic Anemometer is an update and replacement to the original CSAT3, and remains the 3-D sonic anemometer of choice for eddy-covariance measurements. It has an aerodynamic design, a 10 cm vertical measurement path, operates in a pulsed acoustic mode, and withstands exposure to harsh weather conditions. Three orthogonal wind components (ux, uy, uz) and the ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
is a sustainable technology leading to a reduction of carbon dioxide emission supporting the development of an eco-friendly ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Many laboratory applications, such as air emission applications, require calibration gas. To meet these requirements, Peak Scientific have produced the CG15L which generates zero air by removing carbon dioxide and moisture from the air for applications requiring a higher performance than zero air ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
monitoring paths. Typical compounds are carbon monoxide (CO), carbon dioxide (CO2), hydrogen fluoride (HF), ammonia (NH3), oxygen (O2), hydrogen chloride (HCI), water vapour (H2O), and methane ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pC02 system operates ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Peak Scientific’s TOC range of specialist generators have been designed specifically to supply clean, dry, carbon dioxide and methane free air for Total Organic Carbon analyzers. Delivering carrier or combustion gas from an external air supply, these generators are available in two models, depending on your requirement, the standard ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pCO2 system operates ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you