Thermo Scientific - Air Quality Instruments

Model 300 - Diluting Stack Sampler

From

0

Diluting Stack Probe Model EPM.300 Series performs four critical functions to prepare a sample from the stack (sample delivery, course filtering, fine filtering, and sample dilution).Dilution Probes are proven performers with low maintenance requirements in the field and a long life on the stack.The system uses an air driven aspirator which extracts the sample from the stack. It is then passed consecutively through a coarse and fine particulate filter, a preselected glass or quartz critical orifice and diluted with the air from the aspirator. This process has now reduced the dew point of the stack sample to below that of the ambient air.

  • Low-cost installation, maintenance and operation
  • Low extractive flow rates, promoting long filter life
  • No moving parts in the system
  • Easy dynamic in-situ calibration at total dilution system
  • Manual or optional automatic blow back
  • Optional probe heater


Additional Information:
No need for heated sample line in most cases
Diluted sample is transported at positive pressure
Can be used with any existing ambient air analyzer
Available in several corrosion resistant materials

Ordering Alerts: Available in several corrosion-resistant materials.
EPM.302 In-Situ Dilution Probe - Flanged (EPM.302- __ __)

Material of Wetted Parts

L = Stainless Steel
I = Inconel
H = Hastelloy
C = Halar Coated Inconel
Flange Mounting Included
B = Bored
T = Threaded (Available in Inconel only)

Orifice Flow Rate Selection (Dilution Ratio) Included
A = 20 mil (215:1 to 350:1) Glass [2126.064]
B = 50 mil (95:1 to 150:1) Glass [2126.047]
C = 100 mil (44:1 to 75:1) Glass [2126.044]
D = 150 mil (32:1 to 50:1) Glass [2126.045]
E = 200 mil (27:1 to 37:1) Glass [2126.046]
F = 250 mil (20:1 to 30:1) Glass [2126.048]
G = 500 mil (12:1 to 16:1) Glass [2126.049]

Please consult factory for other dilution ratios or Orifice selections

EPM.303 In-Situ Dilution Probe - Threaded (EPM.303- __ __)

Material of Wetted Parts
I = Inconel
H = Hastelloy
C = Halar Coated Inconel

Orifice Flow Rate Selection (Dilution Ratio) Included

A = 20 mil (215:1 to 350:1) Glass [2126.064]
B = 50 mil (95:1 to 150:1) Glass [2126.047]
C = 100 mil (44:1 to 75:1) Glass [2126.044]
D = 150 mil (32:1 to 50:1) Glass [2126.045]
E = 200 mil (27:1 to 37:1) Glass [2126.046]
F = 250 mil (20:1 to 30:1) Glass [2126.048]
G = 500 mil (12:1 to 16:1) Glass [2126.049]

Please consult factory for other dilution ratios or Orifice selections

EPM.305 In-Situ Dilution Probe - Flanged (EPM.305- __ __)

Material of Wetted Parts
I = Inconel
H = Hastelloy

Orifice Flow Rate Selection (Dilution Ratio) Included
C = 100 mil (44:1 to 75:1) Quartz [2126.057]
D = 150 mil (32:1 to 50:1) Quartz [2126.058]
E = 200 mil (27:1 to 37:1) Quartz [2126.059]
F = 250 mil (20:1 to 30:1) Quartz [2126.060]
G = 500 mil (12:1 to 16:1) Quartz [2126.061]

Please consult factory for other dilution ratios or Orifice selections

EPM.306 In-Situ Dilution Probe - Threaded (EPM.306- __ __)

Material of Wetted Parts
I = Inconel
H = Hastelloy

Orifice Flow Rate Selection (Dilution Ratio) Included
C = 100 mil (44:1 to 75:1) Quartz [2126.057]
D = 150 mil (32:1 to 50:1) Quartz [2126.058]
E = 200 mil (27:1 to 37:1) Quartz [2126.059]
F =0 250 mil (20:1 to 30:1) Quartz [2126.060]
G = 500 mil (12:1 to 16:1) Quartz [2126.061]

Please consult factory for other dilution ratios or Orifice selections
Compliance: Designed to meet US EPA 40CFR Part 60 and part 75 requirements

Recommended for:
Can be used in explosion-proof areas
Can be used with any existing ambient air analyzer

Customer reviews

No reviews were found for Model 300 - Diluting Stack Sampler. Be the first to review!