Model 456-3-230 - Hydra-Lift Drum Rotators
From Drum Rotators and Drum Rollers
Morse Hydra-Lift Drum Rotators lift and roll your closed drum to mix and blend the contents. The built-in hydraulic system lifts your drum from floor level and places it quickly and easily for rotation on the drum turner.
-
Most popular related searches
Benefits of Mixing inside Closed Shipping Drums
- Roll drum to remix settled ingredients
- Eliminate transfer, clean-up, and special vessels
- Use separate drum for each batch
- No container to purge between batches
- Nothing to insert into drum to mix
Hydra-Lift Drum Rollers accept a steel drum in upright position. You control the hydraulic tilt to lift an upright drum and place it down on drum rotator wheels. Start and stop drum rotation with a second control. Roll a drum at 5 to 20 RPM until contents are mixed as desired. Then return the drum to vertical to unload.
Drum Rotator Capacity
Hydra-Lift Drum Rollers accept a steel drum in upright position at floor level (add Option POLY-456 to roll a plastic drum). You control the hydraulic powered drum tilt to lift the upright drum and place it down on drum rotator wheels. Start and stop drum rotation with a second control. You control the drum rolling speed. A 55-gallon (210 liter) drum can be rolled from 5 to 20 RPM (4 to 16 RPM on 50Hz models) as desired to thoroughly mix drum contents. Then return the drum to vertical to unload.
- 1,000 Lb. (455 kg) Liquid load
- 400 Lb. (182 kg) Dry load. A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.
- Roll steel drum: 6' to 26' (15 to 66 cm) diameter, maximum 40' (102 cm) length
Overall dimensions: 67' (170 cm) long x 37' (94 cm) wide. See: Dimensional Information.
Available with choice of electric motors. Explosion proof motors available (see chart below).
Available with air motor as model 456-A.
Easy to Load by Hand Truck or Hoist
Load drum rotator with Morse drum truck
A drum truck provides a simple means to deliver and remove your drum from the drum turner. Model 160 is shown here.
Load your upright drum onto drum turner with a below-hook drum lifter. Model 90 Verti-Karrier shown above.
Can also load and unload Hydra-Lift Drum Rotators with:
- MORSpeed Fork Truck attachments
- Model 81 Drum Spotter
Customer reviews
No reviews were found for Model 456-3-230 - Hydra-Lift Drum Rotators. Be the first to review!