Environmental Industry Equipment
-
ShowcaseManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
ShowcaseManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-ABM50-12L-20Li is a military grade lightweight, small footprint, DC voltage powered air sampling system operable from (1) line power, (2) an on-board 20 Ah Lithium ion battery, (3) an external 12-15 VDC power source, or (4) from the F&J 12V Li(Fe)PO4 Battery Bank ...
-
ShowcaseManufactured by Solexperts AGbased in SWITZERLAND
The digital inclinometer probe is used for section-by-section displacement measurements radial to the axis of the measuring tube. The probe has a base length of 0.5 or 1.0 m. The vertical inclinometer is used in vertical boreholes and the horizontal inclinometer in horizontal boreholes. These probes can be integrated into the system of displacement measurement along lines (combination with ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita Dropwise Condensation Technology is a patent pending technology to increase operating efficiency and conserve energy in industrial production facilities. This technology can be applied without apploying any additional system equipment. The KURITA DW product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing ...
-
ShowcaseManufactured by Fluence Corporationbased in USA
This revolutionary aerobic wastewater treatment solution is modular and reduces energy usage by up to 90% compared to conventional treatment. Activated sludge treatment has long been used for aerobic wastewater treatment, but its aeration stage is particularly energy-intensive, which makes it less cost-efficient as a step in decentralized water reuse. At Fluence, our self-respiring membrane ...
-
ShowcaseManufactured by MSE Filterpressen GmbHbased in GERMANY
At first, fully automatic filter presses differ significantly from conventional filter presses. The basic architecture, the working principle and process technology are identical. Fully automatic filter presses are specifically designed for applications in which a continuous operation and fast cycle times are essential and therefore crucial. MSE fully automatic filter presses provide a high ...
-
ShowcaseManufactured by Gutermann AGbased in SWITZERLAND
The AquaScan 610 is the world’s first cordless leak noise correlator and provides highly accurate and error-free leak pinpointing. The combination of high performance, elegant design, compact size and advanced features make this the most popular leak noise correlator available. The AquaScan 610 is highly accurate and extremely portable. It is designed to withstand daily use, rain or shine, ...
-
ShowcaseManufactured by Water Storage Tanks, Inc.based in USA
TimberTanks are water storage tanks that combine the ageless beauty of wood with the durability of galvanized steel roofs and the modern technology of flexible membrane liners for water containment. Wood staves are custom milled to form a barrel shape and are banded together with galvanized steel bands to retain the circular shape. The galvanized steel roof incorporates factory formed and ...
-
ShowcaseManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
ShowcaseManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-cMBR is an immersion type membrane module and cassette frame suitable for the MBR process of small to large capacity wastewater treatment. It is applied not only to general sewage treatment but also to wastewater treatment and water reuse. In addition, when replacing an existing membrane, it can be easily replaced as it is manufactured in the same ...
-
ShowcaseManufactured by Labconco Corporationbased in USA
FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous ...
-
ShowcaseManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring methane and carbon dioxide. It can also be fitted with ...
-
ShowcaseManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
ShowcaseManufactured by Kingspan Klargesterbased in IRELAND
Our AquaHarvest Commercial Pro Rainwater Harvesting system provides a fully integrated solution suitable for new housing developments requiring multiple systems. Made from durable GRP, you can future-proof your project against water shortages with this sophisticated rainwater harvesting system. ...
-
ShowcaseManufactured by Toro Equipment S.L.based in SPAIN
Containerizing Draco press filter equipment: Compact assembly of our equipment, assembled in a 20´DV or 40´HC container, depending on the size of the equipment that it ...
-
ShowcaseManufactured by ENVICON GmbHbased in GERMANY
ENVICON membrane disc diffusers offer a long service life and durable, cost-effective operation of aeration systems. The Disc diffuser EMS1 AeroBest has a proven, strong fine bubble peroxide crosslinked high-performance EPDM membrane, suitable for supply air temperatures of up to 120 °C and operational waterdepths of up to 10.0 m and for higher proportions of industrial and commercial ...
-
ShowcaseManufactured by OSEI - Oil Spill Eater International, Corpbased in USA
Oil Spill Eater II (OSE II) is the world’s most environmentally safe and cost effective bioremediation process for the mitigation of hazardous waste, spills and contamination virtually anywhere of any size, large or ...
-
ShowcaseManufactured by Reliant Water Technologiesbased in USA
Every modern town or city has a wastewater collection system of some type. The wastewater collection system is the conduit for used water, both sanitary and gray (relatively clean, including storm water) water, which initiates at the individual homes and businesses in the community. A primary part of the wastewater collection system is a number of “wet wells” that are used as ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The Aljon 580CL is a full featured twin-ram car logger/baler is capable of efficiently processing 20-25+ complete end of life cars, vans, and pick-ups (including engines, transmissions, and running gear). Power for the machine is provided by a proven Volvo-Penta Tier 4 Final diesel or by an electric motor. The comfortable climate controlled cab is equipped with Aljon’s exclusive monitoring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you