Chemline Plastics Limited

Model Type F3.00/F3.01 - Paddle Wheel Flow Sensors

From

0

The Type F3.00/F3.01 Paddle Wheel Flow Sensors are the core items in the Digiflow FlowX3 line. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter, blind transmitter, batch controller or adjustable flow switch. It can also be fed to other brand instruments or PLC's. The Type F3.00/F3.01 Paddle Wheel Flow Sensors are the core items in the Digiflow FlowX3 line. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter, blind transmitter, batch controller or adjustable flow switch. It can also be fed to other brand instruments or PLC's.

Applications: Water treatment and regeneration, Industrial wastewater treatment and recovery, Textile finishing, Water distribution, Processing and manufacturing industry, Filtration systems, Chemical production, Liquid delivery systems, Cooling water monitoring, Heat Exchangers, Swimming pools, Pump protection.

Type F3.00.H/F3.01.H Hall Effect Paddle Wheel Flow Sensors require a supply voltage between 5 and 24 VDC and is normally fed to a F9.00, F9.02, F9.03 or F9.50 flow monitor which will supply power to the sensor. Hall Effect signals may be transmitted up to 300 meters (984 ft.) without the need for conditioning.
F3.00.H/F3.01.H Compatibility Chart

Type F3.00.C/F3.01.C Coil Effect Paddle Wheel Flow Sensors require a supply voltage between 3 and 5 VDC and are required with the battery powered flow monitor. The signal is normally fed to the F9.20 battery powered (3.6 V) flow monitor, which will supply power to the sensor. Coil Effect signals may be transmitted up to 16 m (52.5 ft.) without conditioning.
F3.00.C/F3.01.C Compatibility Chart

Type F3.00.P Push-pull Paddle Wheel Flow Sensors require a supply voltage between 12 and 24 VDC. The signal is fed to any PLC or flow monitor with NPN or PNP input. Hall Effect signals may be transmitted up to 300 meters (984 ft.) without the need for conditioning.
F3.00.P Compatibility Chart

  • Body Materials:CPVC, PVDF, 316L Stainless Steel, Brass
  • Rotor:ECTFE (Halar)
  • Shaft & Bearings:Ceramic
  • Seals:EPDM, Viton®
  • Pipe Sizes:½' - 24' in two sensor lengths
  • Installation Fittings
  • Velocity Ranges:0.15 to 8 m/s (0.5 to 25 ft./sec.).

  • Ceramic Shaft and Bearings
  • Self Cleaning Design
  • Submersible Sensors Available

Customer reviews

No reviews were found for Model Type F3.00/F3.01 - Paddle Wheel Flow Sensors. Be the first to review!