Model UM-PA - Leak Free Modified Pump
From Condensing Systems
Lubricated vane leak-free pump. Recommended for use in stack sampling with most procedures to get the correct sampling rate and avoid floating the valves in dry gas meters.
- Dimensions (approximate):
- Length: 51cm
- Depth/Width: 24cm
- Height: 44cm
- Weight (approximate): 17kg
Purpose and how to use? Relationship to other components?
Use Aer Sampling's modified lubricated vacuum pumps to get the recommended sampling rate of 0.75±0.25 scfm and to avoid floating the valves in dry gas meters (a problem with diaphragm pumps).
The recommended sampling rate has been carefully selected by experts so that is it optimized on the following factors:
- Maximizing the catch (on filters)
- Minimizing the weight of the sampling train/setup
- Sufficient heat transfer to condense 50% water
- Able to operate at a pressure drop of around 15inHg (if filters get dirty)
Section 184.108.40.206 (Metering System), USEPA Method 5
Page 3-14 (Meter Box Construction), APTD-0581: Construction Details of Isokinetic Source Sampling Equipment
Section 6.2.7 (Suction unit), ISO 9096:2003(E)
Additional ordering/shipping procedures:
Lubrication oil not available for export/sale. Please use GAST#AD220 or equivalent.
Please refer to the FAQs page for shipping and other charges.
Information presented here is subjected to Aer Sampling Group's terms and conditions.
Doc ID: WWUM-PA
Last revised: 10/14/15