Dynotek Fluid Data Management

Model MTM/N10 - Miniature Depth and Level Pressure Sensor



The MTM/N10 depth and level pressure sensor is available for applications where space is very limited. The housing diameter of 0.39 inches offers the user an ideal high performance level measurement in small diameter, i.e. 1/2“ monitoring wells, stand pipes and bore holes. The stainless steel construction and integral polyurethane cable provide a reliable long term solution for these diffi cult-to-measure applications. Kevlar is used as a cable reinforcement to avoid any elongation, particularly when long lengths of cable are required for deep wells. Long term stability of typically ±0.1% per year also contributes toward a maintenance-free installation.

Product Features-

  • Submersible, 0.39' diameter
  • Fully isolated sensing element
  • Accuracies of ± 0.1%, ± 0.25% or ± 0.5%
  • Ranges from 0 to 15 psi to 0 to 150 psi
  • Gauge or absolute pressure
  • Optional separate electronics for amplified output
  • i.e. 4 to 20 mA, 0 to 5/10 VDC


  • Pressure range- Any range from 0 - 15 to 0 - 150 psi FS available, in any engineering units such as psi, Pa, in H20, bar.
  • Pressure types- Absolute and Gauge
  • Proof Pressure- 15 psi up to 150 psi: 3 x FS max. 175 psi
  • Operating temperature range- 25 to 125°F (process media)
  • Compensated temperature range- 25 to 125°F
  • Supply voltage- 10 VDC standard, will operate 1 - 15 VDC
  • Weight- 1 oz approximate (not including cable)

Customer reviews

No reviews were found for Model MTM/N10 - Miniature Depth and Level Pressure Sensor. Be the first to review!