Hydraulic Valves Equipment Near Benin
-
Manufactured by Vahn-Tech International Inc.based in CANADA
Main valve uses globe design for superior control characteristic. CanLeaf Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. Stainless steel used for seat and disc retainer ...
-
Manufactured by Özkan Makinabased in TURKEY
Tilting Disc Check Valves With Hydraulic Damper eliminate the closing slams and water hammer for entire closing stroke. Closing speed is adjustable depends on working conditions. All components of the valves are designed for high stress occurred during damping ...
-
Manufactured by Özkan Makinabased in TURKEY
On request Slanted Seat Check Valves are equipped with hydraulic end stage dampers in order to prevent the water hammer in pumping stations. The end stage damper is active at the last %10 of closing stroke. In case of power failure at the pumping station the disc closes very fast until reaching the damper that is why the back flow passing ...
-
Manufactured by Nectar Group Ltdbased in UNITED KINGDOM
Manufactured in capacities between 3 - 60 CBM. Opening by wireless radio remote control. Hydraulic valves powered by 2 x 12 V (dry cell battery). Closing mechanism activated by lifting crane rope. No motor and no need of electric supply by ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Instruments offers a comprehensive range of pneumatic and hydraulic solenoid valves for hazardous and safe area installation. Available in stainless steel, brass and aluminium with threaded and NAMUR connections. Rotork solenoids offer the highest levels of safety factors and global ...
-
Manufactured by Hidroconta, S.A.based in SPAIN
The Hydraulic Membrane Valves VHM with hydraulic or pneumatic control are controlled by the same conducting fluid (or external fluid at an equal or superior pressure). They record and register very low load wastage and are very easy to maintain. ...
-
Manufactured by Hidroconta, S.A.based in SPAIN
Our hydrant assemblies provide all the advantages and reliability supplied by the hydraulic membrane valves as well as the precision of multi-jet meters or Woltmann turbine meters (officially approved) for diameters ranging from 1/2" a 20". By using the latter, duties such as opening, closing, pressure regulation, and flow restriction, etc.. ...
-
Manufactured by Tecnilab Portugal S.A.based in PORTUGAL
Water supply companies daily face payment defaults for the provided services, leading to systematic cutting off and restoring service actions. When both the water distribution systems and the building networks are operating normally, to cut off the water supply is usually a simple and feasible task. Cut offs through an external shutoff ...
-
Manufactured by Tecnilab Portugal S.A.based in PORTUGAL
Control valves are designed to stabilize pressure, level and flow in a given water system. This type of valve operation may be hydraulic, electric or electronic. There are also electric-hydraulic and electronic-hydraulic combinations available, in remote monitoring and control systems it is recommended to use ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Compressor package with oil-injection. Ideal for gases with light molecular weight, high compression ratio or gases with fluctuating gas composition. Stepless volume control by hydraulically operated slide valves. Design according to API 619 possible. ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
. The valve block and the black box for the controls are installed in an enclosed equipment cabinet. On request, a combination equipment cabinet with an integral hydraulic tank is ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and Pilots & ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PT and 106-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers that are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PT and 206-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers which are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner ...
-
Manufactured by Galarzabased in SPAIN
At GALARZA we offer our costumers the possibility of accessing hydraulic valves with a specific function. Assembling and/or configuring valves at our factory is immensely convenient, so all you have to do is install it, thus saving the time it takes to configure the hydraulic base valves with all its accessories ...
-
Manufactured by Galarzabased in SPAIN
It is a component to pilot of hydraulic valve with a configuration of open, close and automatic. With input connections of 14" male thread; Va" female thread and 1/8" male thread. And an output connection of 1/8" male thread in the 3 ways. where solenoids, pilots and other control elements intervene, with jets or orifices of small ...
-
Manufactured by Galarzabased in SPAIN
The hydraulic valves Series 630 GALARZA are the foundational components used for the construction of various types of valves to drip irrigation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you