Heat Exchangers Equipment Near Marshall Islands
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by Muntersbased in USA
The system is typically installed in gas cleaning devices such as flue gas desulphurization absorbers and wet scrubbers. DV210 RF has several functions such as the protection of the downstream gas-gas heat exchanger (GGH) from droplets, the best available elimination of liquid carry-over escaping into the environment and finally the ...
-
Manufactured by Muntersbased in USA
to desorb the VOCs. The desorbate, a highly concentrated airstream typically 5-10% of the original exhaust volume, is directed to a thermal oxidizer equipped with heat exchangers. The primary heat exchanger is used to preheat the process air prior to combustion. The secondary heat exchanger is ...
-
based in GERMANY
Oil-flooded rotary vane vacuum pumps with IE3 motors according to UL 1004. Capacities ranging from 50 to 180 m3 /hr, Flange motor, bearings on both sides of the rotor, oil/air heat exchanger. Fitted as standard with fine mesh filter, vacuum non-return valve, adjustable gas ballast valve, protection cover and oil separator. Higher ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
by a permanent operating electronic fan. The cooling block with underneath mounted fan and heat exchanger is installed on an aluminum mounting plate to be used as wall-mounting ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
This unique microprocessor controlled Peltier Cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel. The heat exchanger is demountable and ...
-
Manufactured by Dürr Systems, Inc.based in USA
The patented technology of thermal oxidation for siloxane containing gases. During the oxidation of siloxane-laden exhaust, silicon dioxide (SiO2) will be created. This tends to be very sticky and fluffy in nature and typically results in clogging of the heat exchanger media in regular RTO systems. DeSiTHERM™ avoids this problem ...
-
Manufactured by Dürr Systems, Inc.based in USA
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
and crystallization. Their high temperature and pressure stability also ensure safe application in condensate monitoring or leak detection of heat ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers ...
-
Manufactured by ProMinent GmbHbased in GERMANY
The cooling tower regulator SlimFLEX 5a continuously measures and controls conductivity and controls biocide metering, keeps pipework and heat exchangers clean and prevents ...
-
Manufactured by ProMinent GmbHbased in GERMANY
AEGIS S is an easy-to-use water treatment controller for evaporative cooling systems. It is designed to keep the cooling process running reliably. AEGIS S measures conductivity and controls dosing of biocides and corrosion inhibitor, thus preventing biological growth and keeping pipelines and heat exchangers ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
with a heat exchanger. Ozone destructors DOT series work at a temperature of 360 degrees and are indicated to treat flows of ozone ranging from 330 Nm3/h and 50 Nm3/h. As the reaction only proceeds optimally above a minimum temperature, heating of the gas is ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
There are several ways of achieving fast sample cooling in a furnace or oven: Moving the sample into a cool area. Movable insulation panels (manual or automatic). Ambient air blown into furnace or oven. Ambient air blown around inert gas retort. Cycling of inert gas atmosphere through a water cooled heat exchanger. ...
-
Manufactured by Eddyfi Technologiesbased in CANADA
Over the last decade, Eddyfi Ectane has become the undisputed reference for heat exchanger tubing inspection and surface eddy current array, all around the globe. Thanks to a compact form-factor and its unmatched robustness, the multi-technology instrument earned a reputation for being ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Deposits in water systems, especially in heat exchangers may cause significant heat transfer reduction which may lead to loss of efficiency and so cooling ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Biofouling is a major problem for the efficient operation of an open cooling water system. Slime produced by bacteria can very quickly form strong stable biofilm on heat exchanger, pipework and tower fill surfaces with really undesired consequences: Fast development - can be within days. Decrease heat transfer - 1µm of biofilm = 5 – ...
-
Manufactured by Castolin Eutectic GmbHbased in GERMANY
TIG filler rod for anti-wear protective coating, repair and joining of parts in copper and copper alloys. Applications include pipes, condensers, heat exchangers, feed pumps, pipes for scavenger pumps, valves and ...
-
Manufactured by Castolin Eutectic GmbHbased in GERMANY
Low-carbon alloy TIG filler rod for joining and anti-wear protective coating of 18.8-type stainless steels, steels for low-temperature and high temperature service. Applications include pipes, household appliances, food-processing-, chemical and papermaking vessels, and plates and heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you