Diffusers Equipment Near Vatican City
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The BF5 Sunshine Sensor is a versatile, multi-purpose solar radiation sensor. It uses an array of photodiodes with a unique computer-generated shading pattern to measure incident solar radiation. A microprocessor calculates the global and diffuse components of the radiation and determines the sunshine state. Two analogue voltage outputs ...
-
Manufactured by QED Environmental Systemsbased in USA
The Snap Sampler dedicated passive sampling system is the easiest way to collect samples for VOCs, SVOCs, PFAS metals and more. The Snap Sampler system has several advantages over other passive and no-purge sampling devices. Unlike passive diffusion bags that are limited to sampling for a small set of volatile organic compounds (VOCs), the ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
SupNIR-2700 series is infrared analyzing equipment; it uses Holographic digital grating and high sensitivity InGaAs detector (TEC constant temperature cooling). The sample is analysis is based on the diffuse reflection model, and the wavelength range covers 1000-2500 nm. With the help of computer software called RIMP, particles, flakes, ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax tracer gas diffuser is used in performing tracer gas tests in accordance with ANSI / ASHRAE Standard 110. The diffuser is designed to the specifications of standard drawing #110-83M. The diffuser is placed in the fume hood and sulfur hexafluoride gas is injected at at supply pressure of 30 psig. The internal critical orifice ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
the extraction process the solvent condition inside the PLE cell approaches the supercritical region which results in more efficient extractions. The elevated temperature allows the sample to become more soluble and achieve a higher diffusion rate while the elevated pressure keeps the solvent below its boiling point. At elevated pressures and ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Axetris AG is a designer and OEM manufacturer of Laser Gas Detection (LGD) solutions based on Tunable Diode Laser Spectroscopy (TDLS). The TDLS technology provides a valid solution to many gas detection challenges. We support our OEM customers with in-depth technology and application expertise from feasibilities until product launch. We collaborate with you in finding the right product design ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Flexible DRIFTS analysis accessory: The Specac Selector is a flexible Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) Accessory for analysis of powdered and solid samples. It is mounted on its own baseplate to be configured for specified ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
The Tetra:3 multi-gas monitor is a compact, robust and easy-to-use diffusion based detector. Single button operation, small size and clear top-mounted display make it a favourite in the market amongst those working in demanding industrial environments such as those in the water, telecoms, food, brewing or hydrocarbons sectors. Gases ...
-
Manufactured by IDROget Atomizzatori s.n.cbased in ITALY
Towed model operated by the tractor p.t.o. Fiberglassreinforced plastic tank with total emptying and a compact ensuring easy penetration into the vegetation. Excellent air flow diffusion enables a notable work capacity with minimum power input. All models of this series are manufactured according to the stricter EC specifications and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
Manufactured by Digitron Italia S.r.l.based in ITALY
Diffusion type personal gas monitor for Oxygen (O2). Can be used continuously for 5000 hours. Available with loud buzzer, alarm lamp from 4 dimensions, peak hold function. Available with TWA (Time Weighted Average) gas concentration display, memory of peak value, and peak hold function. Thin, lightweight design. Available with gas calibration ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Fine bubble aeration system for lagoons & large surface area ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Designed for aeration of Activated Sludge Basins in Municipal and Industrial Wastewater Treatment plants. The AQUATUBE® specific design prevents sedimentation and Optimises Mixing and Oxygen Transfer. The AQUATUBE® 90 is designed to be installed on DN100 stainless steel pipe or DN110 PVC using simple fastening system. The AQUATUBE® 70 can be installed on square stainess-steel ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Diffuser cover made of reinforced polypropylene. Diffuser designed for many various operating conditions: Ideal for Fibre Loaded Sludge, Effluents containing Grease, and Chemical Based wastewater ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Polypropylene feeder for grids in bioreactors and degreasing tanks. Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you