LNI Swissgas

- Model NG Polluce XL - PSA Nitrogen Generator for LC-MS

From

0

POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and phthalates-free.

The generator is equipped with a built-in oil less scroll compressor with inverter technology. Inverter electronically control the electrical voltage, current and frequency of the compressor motor. It receives information from sensors monitoring operating conditions, and adjust the revolution speed of the compressor, which directly regulates air pressure output. Optimum control of operation frequency results in eliminating the consumption of excessive electricity and providing the most comfortable conditions to increase the compressor life-time.

Thanks to the CPU with touch screen display, the continuous monitoring of operational status is guaranteed.

  • PSA Technology
  • Easy use and installation (plug and play)
  • Low noise
  • Generates nitrogen on demand with exclusive electronic flow control
  • Low energy exclusive compressor inverter controlled
  • Designed to run 24 hours a day
  • Pressure up to 8 bar
  • CH4 oven scrubber (option)

  • LCMS
  • Solvent evaporation

  • Models: NG POLLUCE XL: 40

N2 outlet

  • Flow rate (Max): 40 l/min
  • Outlet pressure (Max): Up to 8 bars
  • Nitrogen purity*1:
    • > 98.5 @ 40 l/min
    • > 99 @ 20 l/min
    • > 99.99 @ 10 l/min
  • Outlet Dew-point: <-50°C
  • Outlet particulate: 0.01 micron

Communication

  • LCD with touch-screen: Standard
  • RS485: Standard
  • RS232: Standard
  • Digital I/O: Standard

General data

  • Supply rating: Single phase 220-240Vac 50/60Hz
  • (100-115Vac 50/60Hz optional)
  • Connection type: IEC C20
  • Installation power (max): 1.8KW
  • Internal N2 tank capacity: 50 l
  • Internal Dry air tank capacity: 5 l (optional)
  • Net weight: <180Kg
  • (<190Kg with 100-115Vac)
  • Dimensions (W x D x H): 59 x 91 x 100 cm

Connections

  • N2 Outlet port: 1/4” female BSPP
  • Dry air outlet (optional): 1/4” female BSPP
  • Drain port: 1/4” female BSPP

Operating/storage conditions

  • Working Temperature: 5-40°C (41-104°F)
  • Storage Temperature: 1-50°C (34-122°F)
  • Humidity (max, non condensing): 70% at 25°C (77°F)
  • Noise*2: < 65dB(A)
  • IP rating: IP20
  • Pollution degree rating: 2 (with no aromatic compounds)
  • Altitude: < 2000m

*1 The purity refers to the residual oxygen
*2 @ 1.5mt front side

Customer reviews

No reviews were found for NitroGen - Model NG Polluce XL - PSA Nitrogen Generator for LC-MS. Be the first to review!