Dab Pumps

Dab Pumps

- Submersible Pump

From

0

Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing.
Rotor mounted on overdimensioned, greased-for-life ball bearings. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version. For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force. Supplied with standard power cables for the single-phase version:

  • 5 metres H05RN-F for: NOVA 180 M-A
  • NOVA 300 M-A
  • NOVA 600 M-A
  • 10 metres H05RN-F for: NOVA 180 M-NA
  • NOVA 200 M-NA
  • 10 metres H07RN-F for: NOVA 600 M-NA
  • Standard cables supplied for the three-phase version:
  • 5 metres of HO7RN-F cable. For the single phase the
  • standard is a SCHUKO plug EEC VII.
  • For special version available with special stainless
  • steel motor shaft.

  • Operating range: from 1 to 16 m3/h with head up to
  • 10.2 metres.
  • Liquid temperature range: from 0°C to +35° C for
  • domestic use.
  • Pumped liquid characteristics:
  • NOVA fibre-less murky water.
  • Granulometric passage through the suction
  • grid:
  • NOVA 180-NOVA 200 5 mm.
  • NOVA 300 – NOVA 600 10 mm.
  • Min. suction depth:
  • NOVA 180 A 77 mm.
  • NOVA 180 NA – NOVA 200 8 mm.
  • NOVA 300 85 mm.
  • NOVA 600 A 175 mm.
  • NOVA 600 NA 38 mm.
  • Maximum immersion depth: 7 metres.
  • Maximum dry running time: 1 minute.
  • Protection level: IP 68.
  • Insulation class: F.

Customer reviews

No reviews were found for NOVA - Submersible Pump. Be the first to review!