Only show results available in Virginia? Ok

Wind Turbine Engineering equipment

  • ASM launches the PRAS5 range of Heavy Duty Rotary Position Sensors with rugged housing for harsh environments

    Heavy duty applications require products from companies that are reputed for their quality, reliability and attention to detail. This is why ASM has developed the NEW range of PRAS5 Heavy Duty Hall Effect Sensors with a measuring range of 0-360° and sealing up to IP69K. Whenever a rotary sensor is to be used for a “Harsh Outside” application such ...

    By Automated Control Engineering Group Pty Ltd based in Cardiff, AUSTRALIA.

  • TECCON - Industrial Stacks

    TECCON supports its customers in the selection of structural shape and materials of industrial stacks in order to reach the best suitable design for a given location, flue gas composition, temperature and volume. The dimensioning and the evaluation that the construction will withstand the expected static and dynamic loads due to corrosive media, ...

    By TECCON Engineering GmbH based in Lieserbrücke, AUSTRIA. from Steelworks Product line

  • Lafert - Model AMBY, AMBZ and AMS Series - Brake Motor

    The harsher the working environment the greater the demand on engineering standards, and non-standard then becomes the norm. Custom-design and engineering fulfil this need to give the reliability and performance demanded.

    By Lafert S.p.A based in San Donà di Piave (VE), ITALY. from Brake Motors Product line

  • TurbinePhD - Condition Monitoring System

    TurbinePhD is the most cost-effective and easy-to-use vibration-based condition monitoring system in the wind industry. This complete condition monitoring solution includes purpose-built hardware, automated analysis of the vibration data, and an intuitive web-hosted user interface. Unlike traditional condition monitoring systems, TurbinePhD was ...

    By NRG Systems based in Hinesburg, VERMONT (USA). from Condition Monitoring Systems Product line

  • EDGE - Model Slayer XL - Twin Shaft and Slow Speed Shredder

    The EDGE Slayer XL, twin shaft, slow speed shredder provides an additional 20% more throughput than the smaller Slayer X. Powered via a Caterpillar, 350hp engine; the Slayer XL has superb fuel economy with an average fuel consumption of just 25-30ltr/hr (7-8 USG) and offers operators with the lowest running and maintenance shredder on the ...

    By EDGE Innovate based in Dungannon, NORTHERN IRELAND. from Shred Product line

  • ADES - Mixed Polygeneration Systems

    The polygeneration seeks to obtain a continuous supply of electrical energy depending on the energy sources availability and maximum fuel economy. An intelligent system prioritizes most suitable energy source at all times.

  • APG-Neuros - Turbo Blower

    APG-Neuros’ Turbo Blower technology was founded in the aerospace and defense industry where Aero Engines were used in Unmanned Aerial Vehicles (UAV) and in the F-16 military aviation program, making the technology tested and reliable. The core of the technology is the patented 3rd generation bump foil air bearing which is oil-free and ...

    By APG-Neuros Inc. based in Blainville, QUEBEC (CANADA).

  • Silicon Nitride Materials

    Application-oriented material development and modification of silicon nitride and composite materials; Design of microstructure and phase composition. Evaluation of sintering behavior and property potential of Si3N4 powders. Consulting on material selection. Development and testing of prototypes for applications subjected to mechanical, chemical ...

  • Acoustic Camera

    It used to be a dream to imagine being able to ‘see the sound’, but you can do exactly that with this system from GFaI in Berlin. Using an array of microphones, with a patented camera, the system uses a beam-forming technique to locate the sources of sound, and create an image superimposed on an optical image taken at the same time.

    By AcSoft Ltd based in Wingrave, UNITED KINGDOM.

  • Galvanized - Single Diaphragm Windmill Aeration System

    The Koenders Single Diaphragm Windmill Aeration System includes: 12', 16', 20', 24' or 25' Uni-Pole Windmill, Single Diaphragm Compressor, 100' of Airline, Airstone Diffuser and Foot Valve. Up to a 3 year warranty.

    By Koenders Water Solutions Inc. based in Regina, SASKATCHEWAN (CANADA). from Windmill Aeration Systems Product line

  • SymphoniePRO - 26-Channel Data Logging System

    An advanced, 26-channel data logging system, SymphoniePRO is purpose-built for the renewable energy professional. As the newest data logger in the Symphonie series, SymphoniePRO brings significant upgrades in terms of capability and flexibility while building on the unparalleled foundation that is the Symphonie product line—a series of ...

    By NRG Systems based in Hinesburg, VERMONT (USA). from Data Loggers Product line

  • Zero Greenline Ferry

    SCOD Presents The World’s First Leap to Zero Greenline Ferry; An Eco Tourism Excursions Ferry for major Ports and Harbors and the ideal Zero Carbon viewing platform for the upcoming America’s Cup in the San Francisco Bay. Richard Sauter head of Sauter Carbon Offset Design commented; “Considering that the America’s Cup is ...

    By Sauter Carbon Offset Design based in Kuta, INDONESIA.

  • FEROFORM - Model T814 - Composite Material

    FEROFORM T814 is a composite material made from woven fibre bonded with resin with PTFE as a friction modifier.

    By Tenmat ltd based in Manchester, UNITED KINGDOM. from FEROFORM Product line

  • Standalone Systems

    Standalone solar power systems are solutions for a decentralised, green power supply. They come into their own, particularly where a mains-connected supply is impossible or impractical for technical, economic or other reasons. Today more than 1.6 billion people still have no access to electricity. Standalone solar power systems offer excellent ...

    By EBITSCH energietechnik GmbH based in Zapfendorf, GERMANY.

  • Cellulosic Technology

    Cellulosic technology is a key to significant reduction of greenhouse gases and is a significant global warming technology.

    By General Biomass Company based in Evanston, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you