Model PN5300 - Automatic Sample Injector
From Other Products
The PN5300 automatic sample injector includes the latest state-of-the-art auto injector technology, such as a double needle with positive headspace pressure, extensive wash routines for minimal carry over and three injection modes including micro liter pick-up mode for zero sample loss, huge injection range and full biocompatibility.
Offering space for two deep well, shallow well or vial rack adapter plates, the PN5300 is idealy suited to be integrated with a wide range of different FFF systems. The newly designed Peltier cooling/heeting keeps samples stable in a closed environment for maximum reproducibility. The temp range from 4°C up to 40°C prevents degradation, evaporation or precipitation of sample during storage and processing with any FFF system.
The system allows the fl exible use of 96 or 384 wells, deep or shallow, sealed or open. Of course „conventional“ vial systems such as standard chromatography vials 1.5 mL, sealed or open and with or without micro insert, can be used as well. The system is also open to special vial formats such us small Eppendorf tubes and preparative vials with 10 mL volume.
The proven and reliable pressure assisted sample aspiration concept assures unrivalled injection precision and accuracy for a broad range of injection volumes and a large variety of samples.
No dilution, but removal of contaminants is the clear concept of the PN5300 when it comes to rinse/wash procedures to avoid any possible carry-over! Both, the special design of the needle wash station and the rapid wash solvent delivery ensures a very effi cient removal of contaminants within a short time. Additionally the possibility to select an extra wash solvent helps to get rid of even the stickiest analyte.
Special Features of the PN5300 Autosampler System
State-of-the-art autosampler system, fully compatible with the completely line of Postnova FFF hard- and software products.
Complete integration of the autosampler system with FFF-Light Scattering systems (MALS / DLS) for fully automated measurements of up to 384 samples (well plates).
Free front accessible injection valve, needle, rinse port and sample trays for easy maintenance and cleaning procedures.
- S-SAM-5300-001 PN5300 Autosampler
- S-SAM-5300-002 Prep Option for PN5300
- S-SAM-5300-003 Metal Free Option for PN5300
- S-SAM-5300-006 Heating-Cooling Option for PN5300
- S-SAM-KIT-003 Maintenance Kit 3 PN5300, aqueous
- S-SAM-KIT-004 Maintenance Kit 4 PN5300, organic
20-80% rel. Humidity
300 x 575 x 360 mm
95-240 V, 50-60 Hz
0.1 - 5 cP
RS232C; option TCP/IP
2 TTL in; 1 relay out
2 Micro Titer plates according to SBS standards; 96-well high/low and 384-well low formats, 48-vial or 12-vial trays; any combination of plates is allowed, except for 384 low left and 96 high right side; standard 1.5 mL chromatography vials with/without inserts, 10 mL prep vials and small Eppendorf tubes can be used. Maximum vial/plate height is 47 mm overall. Automatic missing vial or well plate detection via internal sensor.
1-5000 μL program mable, 10 mL loop optional
500 μL standard syringe, 2500 μL for prep option
Electrical switching time < 100 ms
Piercing Precision Needle:
± 0.6 mm
Integrated wash solvent bottle
SS316, PTFE, Tefzel, Vespel, Glass, Tefl on, Peek; can vary with model metall-free etc.
Injection Cycle Time:
< 60 sec in all injection modes with injection volume < 100 μL including 300 μL wash.
Full loop, partial loopfi ll and μL pickup mode, pressure-assisted sample aspiration
RSD < 0.3 % for full loop injections (at 1.0 cP)
RSD < 0.5 % for partial loopfill injections (10 μL Vol.)
RSD < 1.0 % for μL pick-up injections (10 μL Vol.)
Sample Tray Cooling:
Built-in Peltier Range 4°C up to ambient -3°C
Sample Tray Cooling/Heating:
Built-in Peltier cooling/heating 4°-40°C
2.5 mL syringe; prep. valve; 10 mL sample loop; LSV needle; 24 pcs of 10 mL vials 2 prep sample trays, injection volume 1 μL up to 19.999 μL in 1 μL increments.