Pompe Cucchi Srl

Pompe Cucchi Srl

- Model B Series - Volumetric Gear Pumps

From

0

This traditional series of volumetric gear pumps obtained by sand casting is mainly used for liquids transfer up to 15 bar. Apart from the usual execution in cast iron, it is possible to supply them in bronze or in Aisi 316 stainless steel. The pumps B series are used in numerous sectors in liquid transfer with viscosity range from 1 to 100.000 cp. In case of products with medium/high viscosity value, it can be used in dosage services with the use of frequency variators or motovariators, electrically servo controlled ones with 4÷20 mA signal or pneumatic ones with 3 ÷ 15 psi signal as well.

The construction of this series of gear pumps meets the regulations of the directive 2006/42CE and of the standards EN ISO 12100, EN 809, and has the certification GOST-R. Executions on request in accordance with Directive 94/9/EC (ATEX) and to API 676 - NACE MR0175; isalso available with GOST R - RTN (Rostekhnadzor).

The management of the quality system of pumps Cucchi Srl operates in according to UNI EN ISO 9001:2008 (Certificate No.SQU132AQ252 / 4).

Main applications: Thermohydraulic sector: oil, gas oil transfer. Agricultural sector: molasses pumping and other liquid products for the animal nourishment. Compressors sector: hydraulic oil pumping for the lubrication of large industrial compressors. Fire alarm systems sector: high pressure foam extinguishers.

Industrial sector: glue, resin, varnish, pre-heated fat, adhesives, isocynate, polyol, polymer, shampoo, etc Chemical sector: transfer and dosage of any type of liquid free from solid suspensions.

Gear pomps our range BZ assembled in a balance pressure proportioning System - water/foam - capacitu from 5.000 till 17.000 l/min - in accordance with NFPA 11.

B series pumps are realized in cast iron, bronze or in Aisi 316 stainless steel (only for the models in stainless steel from size 5 to 150 see MX series pumps). Shafts and gears undergo a particular thermal anti-wear and anti-friction treatment. The materials are chosen according to the pump type. The constructing standard provides gears and shafts in tempered carbon steel for cast iron pumps; bronze gears and Aisi 316 stainless steel shafts for bronze pumps; Aisi 316 shafts and gears for stainless steel pumps. For hard duty works it is possible to provide gears and shafts with 'HH' (High Hardness) treatment. This special treatment considerably increases the resistance to wear and confers major protection from chemical corrosion, and an extremely low friction coefficient. Shafts are supported by bushings in reinforced PTFE or sintered self-lubricanting material according to the application type. The seal can be carried out with packing (design temperature 300°C) or with a simple or double mechanical seal (design temperature 200°C) in various selected materials on the basis of the chemical and physical characteristics of the pumped product. The standard connections are BSP threaded ones for sizes from B5 to B40, oval threaded couner-flange BSP for sizes from B50 to B150 and square threaded couner-flange BSP for sizes from B200 to B600. All the models can be integrated with ANSI or DIN flanges on request. If not stated otherwise, the rotation direction of the pump is clockwise ( side view shaft exit), by request it is possible to insert mechanical seals suitable for counterclockwise or reversible rotation. BX models are manufactured in AISI 316 for standard execution, with thermic antiwear, antifriction treatment that makes the components of the pump black ('Black treatment'). For the food sector, by request, it is possible to use thermic treatment that maintains the pump's parts natural steel colour ('White treatment'). By request, it is possible to add a pre-heating chamber to the pump and/or an incorporated safety valve. The pumps of this series can be supplied bare shaft or with base plate coupled to engines, engine reducers or variators with alignment constructed according to the CE regulation. The pump code of this series is the same as for the other gear pumps of our production: E.g.:00BG100/WECD0PF 00BG100 Cast iron steel 100 l/min. ( 1450 R.P.M.) capacity W = mechanical seal in ceramics/graphite/vyton. E = brass safety valve incorporated. C = Tempered gears and shafts in carbon steel without special treatments. D = support bushings in sintered self-lubricating material. 0 = no special execution. P = execution with pre-heating chamber. F = ANSI flanges.

Customer reviews

No reviews were found for Pompe Cucchi - Model B Series - Volumetric Gear Pumps. Be the first to review!