Pristine Water - Model PBP Series - Batch Type Electrochlorination Systems
From Electro Chlorination - Batch Electrochlorinator
Batch type electro chlorination systems are perfect for small to medium requirements of chlorine starting from 5 gms per hr to 500 gms per hour. They are lower in cost than continuous systems. Batch systems, as the name suggests, produces chlorine in batches of 8 hours each. This chlorine is stored in a tank and is dosed using dosing pumps. The whole process is repeated when the stored chlorine is used up. Our smallest and most compact batch process Electrochlorination system is the Compclor or the Compact Electro chlorinator. For chlorine requirement greater than 5gms per hour, we offer the Batch type Electrochlorinators.
Products Details
Batch type Electrochlorinator produces required chlorine in the form of Sodium Hypochlorite in 8 hours. Add salt and water and switch on the power supply. The system automatically stops after producing required chlorine. Supplied with Reaction Tank fitted with the Titanium Electrolyzer and Power Supply Unit with Auto Timer Controls. Storage Tank and Dosing Pump are optional. To inject Gas Chlorine, Liquid Chlorine or Bleaching powder to disinfect water or waste water is a common practice all over the world. But hereafter you do not have to face the problem of procuring and the hazard of storing of these chemicals. Our Electrochlorinator produces Liquid Chlorine (Sodium Hypochlorite) from common salt as per your requirement. It is safe and cost saving.
Features
- Titanium Electrolyzer is fixed inside the Reaction tank.
- Reaction tank is made of Fiber Glass with Vinyl Ester Resin
- Tank is provided with salt measurement and filtering system
- Electronic timer for accurate time.
- Timer stops automatically during power failure and starts on power supply resumption, to maintain exact batch time.
- Eight hours batch time.
- The long life Power supply.
- Power supply unit can take wide voltage fluctuations and frequency changes.
Application
- Medium to large water treatment facilities for disinfection of drinking water
- Waste water, Effluent and Sewage treatment.
- Hotels, Hospitals, Educational institutions for Drinking water.
- Disinfection in Water parks, Cooling water circuits, Fire water storage
Operation
- Put good clean salt (as indicated on the tank) in the space provided on the top cover of the Reaction tank
- Insert the fresh water pipe in the Salt feed opening
- Open the water tap and fill the reaction tank up-to the indicated mark.
- The water will dissolve the salt as it fills the tank.
- Switch on the power supply.
- Set the timer at 8 hours.
- The system will start and the chlorine production will begin.
- After the preset time the power supply will stop.
- Now the Sodium Hypochlorite is ready.
- Open the bottom Valve and remove all the sodium hypochlorite into a storage tank.
- The hypo can be dosed from the storage tank through a Dosing Pump.
Customer reviews
No reviews were found for Pristine Water - Model PBP Series - Batch Type Electrochlorination Systems. Be the first to review!