Pulsar Process Measurement Ltd.

Pulsar Process Measurement Ltd.

- Model Quantum 3 - Superior Pumping Station Controller


Quantum 3 is a fully-featured pump controller, using Pulsar's unique non-contacting ultrasonic technology including DATEM digital echo discrimination to provide sophisticated level management. Quantum 3 can be programmed to provide an alarm based on the time remaining before the station or well spills over. Vital for utilities who face the risk of prosecution if a station pollutes the local environment. Quantum 3 adds the ability to interface with up to four Flow Pulse non-invasive flow monitors, so all flow-rate based alarms and control is based on measured rather than calculated flow.

  • Can assign a Flow Pulse to either a pump, a main outlet or stand-alone measurement
  • 24VDC output supply capable of supplying 4 Flow Pulse units
  • 'Burst and Block' now based on real flow
  • Auxiliary display can now cycle through each Flow Pulse and display real flow
  • Totaliser sums real throughput rather than deriving from level measurement
  • Has universal power supply input of 22-28 VDC and 85-264 Vac
  • Storm detection alarm
  • NRV leakage alarm
  • Time to spill calculation
  • Automatically resets tripped pumps
  • Easy prompt led set up
  • RS485 Modbus and Profibus DP V0 and V1 options
  • Pump efficiency alarm function
  • Peak power tariff avoidance

  • Pump Control
  • Time to spill warning requirements
  • Reduction in power cost requirements
  • Pump monitoring and control
  • Water and waste water


  • Weight : Nominal 1.3kg (2.9lbs)
  • Case material : Stainless steel and polycarbonate, flame resistant to UL94 V0
  • Transducer cable requirements : Twin screened
  • Maximum separation : 1000m (3280ft)
  • Fascia mount : 200 x 112mm (7.87 x 4.41in) front, 165 x 105mm (6.49 x 4.13in) cut-out


  • Digital communications : RS485 Modbus or Profibus DP V0 or V1


  • IP rating fascia mount : IP64
  • Max. and min. temperature (electronics) : -20ºC to +55ºC (-4ºF to +131ºF)
  • Flammable atmosphere approval : Safe area: compatible with approved dB transducers allowing installation to zone 0
  • CE approval : EMC approval to BS EN 50081-1:1992 for emissions and BS EN50082:1995 for immunity, and to BS EN61010-1:1993 for low voltage directive
  • Power supply : 85-264V ac 50/60Hz, 22-28V dc


  • Accuracy : 0.1% of the maximum range
  • Resolution : dBMACH3 0.25mm, dB3 0.5mm, dB6 and dB10 1mm, dB15 1.5mm, db25 2.5mm, dB40 5mm
  • Range : Depending upon transducer, from 125mm to 40m (0.41 - 130ft)
  • Description : DATEM (Digital Adaptive Tracking of Echo Movement)


  • Volt-free contacts : 10 in total. Relays 1-5 form C (SPDT 5A, 220V ac.
  • Relays 6-10 form C (SPDT) 3A, 220V ac
  • Digital inputs : 7 No or NC with 24V dc internal supply, available max. 20mA
  • Analogue output (adjustable) : 2 off Isolated outputs of 4-20mA or 0-20mA into 500Ω (user programmable and adjustable) 0.1% resolution
  • Serial output : RS232 via RJ11 port
  • Display : 6 digits plus 12 character text, plus bargraph with direction indicators, remote communicator idintifier and program/run/test mode indicators


  • On-board programming : Standard with integral keypad
  • PC programming : Via RS232 (RJ11 port
  • Programming security : Via password (user selectable and adjustable)
  • Programmed data integrity : Via non-volatile RAM, plus backup

Reviews disabled

Reviews have been disabled for Pulsar - Model Quantum 3 - Superior Pumping Station Controller.