Real Multi-Wave Sensor - Model SL Series - Water Quality Monitoring
Features & Benefits:
- Affordable real-time monitoring
- Multiple wavelength UV-VIS sensor with LED technology
- Wastewater to high purity measurement ranges
- Operator friendly, low maintenance design
- Quick and simple optical measurements
- Reagent free operation
Applications
-
Drinking water solutions for the coagulation optimization - TOC, UV254 - Water and Wastewater - Drinking Water
Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization ...
-
Drinking water solutions for the TOC removal efficiency - Monitoring and Testing - Water Monitoring and Testing
Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine disinfection.
-
Drinking water solutions for the DBP formation potential - Water and Wastewater - Drinking Water
Problem: Drinking water plants that use chlorine for disinfection must ensure organic matter is removed before chlorination to limit the formation of harmful disinfection by-products (DBPs), most commonly Trihalomethanes (THMs) and Haloacetic acids (HAA5).
-
Industrial solutions for process water control - Water and Wastewater
Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.
-
Industrial solutions for cooling water contamination - Water and Wastewater
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.
-
Industrial solutions for boiler feedwater impurities - Water and Wastewater
Problem: Poor water quality can result in significant operational problems and possible shut down of boiler systems. To limit the potential for scaling, deposition and corrosion, most boiler water is treated physically or chemically to remove impurities and improve efficiency in the system.
-
Industrial solutions for ultrapure water monitoring - Water and Wastewater - Water Monitoring and Testing
Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source water.
-
Industrial solutions for water reuse optimization - Water and Wastewater
Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.
Downloads related to this product
Real Multi-Wave Sensor Specification Sheet - Multiple Parameter Water Quality Monitoring
Customer reviews
No reviews were found for Real Multi-Wave Sensor - Model SL Series - Water Quality Monitoring. Be the first to review!