Model SCR DeNOx - Reduction DeNOx DeDioxin Selective Catalytic
SCR technology converts flue gas NOx to nitrogen and water by cataltically promoted reaction in the presence of reducing agent such as ammonia, urea, etc. SCR technology offers an optimal and effective solution to control Nitrogen oxides (NOx) emissions during combustion processes. TYPICAL NOX SOURCES > Gas turbine exhaust > Lean-burn engines > Process Heaters & Furnaces > Industrial Boilers > Industrial Processes > Incinerators & process ovens. COMMON APPLICATIONS > Power Generation > Cogeneration > Nitric Acid Production > Natural Gas Transmission > Pumping Stations > Marine Power Units http://ranido.cz/SCR_DeNOx.html
SCR technology converts flue gas NOx to nitrogen and water by cataltically promoted reaction in the presence of reducing agent such as ammonia, urea, etc. SCR technology offers an optimal and effective solution to control Nitrogen oxides (NOx) emissions during combustion processes.Selective catalytic reduction principle
The NOx reduction reaction takes place on the catalyst surface. Before entering the catalyst layer the ammonia is injected and mixed with flue gas:
Another effect expect lowering the emissions of nitric oxides (DeNOx effect) is catalytic destruction of dioxins and furans, which are some of the most toxic chemicals known to science.
SCR DeNOx process is inovative, environmentally friendly and effective solution to reach the requested performance at an optimised cost.
Honeycomb catalysts consist entirely of catalytically active materials (titanium dioxide, vanadium oxides, tungsten oxides) and commonly are used in low dust applications.
- High specific surface area
- High activity in low-dust flue gases
- Variable pitch and length
- Low-dust flue gas applications (<10g/M3)
Plate catalysts consist of catalytically active material rolled onto stainless steel mesh. The catalyst plates are located in element frames that are installed in a steel module.
- High erosion resistance
- Variable pitch
- Low pressure drop
- High flue dust applications (<100g/M3)
All our catalysts are specially designed and manufactured to meet our customer’s requirements. We help you to maximize your reduction of NOx emissions while providing a cost effective solution.
Our products are known by providing the lowest possible pressure drop when compared to competitive designs. Lower pressure drop means higher system efficiency and better overall performance.
Our SCR DeNOx catalysts provide high NOx destruction at medium range operating temperatures. High activity, poison resistant formulations means reduction of nitrogen oxide emissions with less catalyst volume – less volume means lower capital cost. NOx reductions over 90% are common and in some applications over 98% reduction can be achieved.
Many years of experiance in catalyst research and production allow us to provide the most durable product for your application. Our products will provide a long life and tolerate aggressive process conditions allowing extended intervals between product replacement.
- SCR Catalyst Replacement Management
- SCR Catalyst Sampling Procedure
- SCR Catalyst Installation Supervision
- SCR Catalyst Activity Testing in real conditions
- SCR Catalyst SO2/SO3–Conversion Rate Test
- SCR Catalyst Screening (x-ray)
- SCR Catalyst Screening (EDX)
- SCR Catalyst Pore Structure Analysis