KSR Kuebler Niveau-Messtechnik AG

KSR Kuebler Niveau-Messtechnik AG

Model BLR - Reed Sensor

From

0

The model BLR reed sensors are used for continuous monitoring and recording of the liquid level in connection with transmitters. They work on the float principle with magnetic transmission (permanent magnet, reed switch and resistance measuring chain) in a 3-wire potentiometer circuit. A magnetic system built into the float actuates reed contacts, through the walls of the bypass chamber and of the sensor tube, in a resistance measuring chain (potentiometer). The measurement voltage generated by this is proportional to the fill level.The resistance measuring chain is made up from reed contacts and resistors soldered onto a PCB. Depending on requirements and design several different contact separations from 5 to 18 mm are available. For selecting the optimum sensor (sensor model, connection housing, electrical connection, sensor tube (material and total length), contact separation, head-mounted transmitter, measuring range, approval) we offer application-related technical advice.

  • Sensor for the continuous level measurement of liquids in bypass level indicators
  • Chemical, petrochemical industry, natural gas, offshore, shipbuilding, machine building, power generating equipment, power plants
  • Process water and drinking water treatment, food and beverage industry, pharmaceutical industry

  • Installation of head-mounted transmitters in the connection housing possible
  • Wide variety of different electrical connections, process connections, materials and contact separations
  • Programmable and configurable head-mounted transmitters for 4 ... 20 mA, HART®, PROFIBUS® PA or FOUNDATION™ Fieldbus field signals
  • Explosion-protected versions
  • Temperature ranges from -100 … +350 °C

Customer reviews

No reviews were found for Model BLR - Reed Sensor. Be the first to review!