Ruf Maschinenbau GmbH & Co. KG

- Briquetting Machines / Briquetting Press for Metal

From

0
RUF Briquetting Systems for metal chips (aluminum, steel, copper, cast iron, magnesium, ...) Throughput capacities between 30 and 5,000 kg/hour. Depending on the requirements, our briquetting presses are powered by hydraulic motors between 4 kW and 90 kW and work at specifically calculated pressure of up to 5000 kg/cm². Our compact briquetting systems can directly be integrated into existing production facilities and are designed for a fully automatic 24-hour operation. Advantages: - volume reduction - higher profits for briquettes compared to loose chips - recovery of expensive cutting fluids - lower combustion and higher melting yield

High efficiency

Briquetting has a rather pleasant and economical side effect: valuable cutting fluid is extracted and reclaimed from moist metal shavings and sludges, ready for reuse after a treatment process. Therefor the consumption of expensive cutting fluid is reduced whilst at the same time the costly disposal of wet chips and sludges is kept to a minimum. Melting down briquettes, compared to loose shavings and chips, the burn-up is significantly lower resulting in a higher melting yield.

Perfect adaption

Briquetting metals you can choose between sizes from 60x40mm to 150x120mm. The length of the briquette may vary within the given parameters. The choice of the briquette format depends on the required throughput as well as the quality of the source material and its bulk density.

Subject to technical modifications.
The throughput capacity depends upon the machine design as well as the type and form of the material used.

Materials

Metal chips that are produced in the metal-working industry can be profitably pressed with RUF briquetting systems.

Through the process of briquetting, the value of residual metals can be increased considerably. A further advantage is the recovery of expensive cutting fluids that can be pressed out of wet chips and then reused.

When melting briquettes, combustion is significantly lower and results in a higher melting yield than with loose chips.

Formats

Metals can be processed into briquettes measuring between 60x40 mm and 150x120 mm. The length of the briquette is variable and can be set between certain predefined limits.

The choice of the briquette format depends on the required throughput as well as the quality of the source material and its bulk density. Select between round or rectangular briquette shapes.

Machines

Depending on your requirements, our systems are powered by hydraulic motors of between 4 kW and 90 kW and work at specifically calculated pressures of up to 5,000 kg/cm2.

When configuring a briquetting system, we take into consideration all customer-specific needs and thus offer individually customised solutions.

Our compact briquetting systems can directly be integrated into existing production facilites and are designed for a fully automatic 24-hour operation.

The throughput capacities of RUF briquetting systems designed for processing metals are between 30 and 4,800 kg per hour.

Benefits

  • suitable for fully automatic operation 24/7
  • compact design
  • low, electrical rating with regard to the briquetting performance
  • higher profits with briquettes compared to loose chips
  • lower combustion and higher melting yield
  • recover expensive cutting fluid

Customer reviews

No reviews were found for RUF - Briquetting Machines / Briquetting Press for Metal. Be the first to review!