Salamandra Safety

- Model AGS-11/2 - Aerosol Fire Extinguisher AGS-11/2

Description AGS-11/2 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration. Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 3.4 m3. Due to its construction, the mass fraction of condensed phase is significantly reduced and the temperature of generator body is reduced as well. The electrical impulse which comes to the starter which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle. Generator is recommended for fire protection of the transport, electronic equipment, high voltage power units, different high-frequency devices including those which are used on the transport (it conforms to requirements of

Technical characteristics


Fire classes

Fire Class A Fire Class B

Aerosol generating cartridge weight

0.17 kg

Protected volume

3.4 m3

Net weight

0.85 kg

Diameter - Height

124 mm x 32 mm

Operating time

9 – 11 sec

Aerosol temperature at the distance of 0.5 m from generator

75° C

Starter type

Internal UZ-7.5

Starter impedance

7.5 Ohm

Starter minimum current

1 A

Starting voltage

8 – 30 V

Duration of the starting impulse

Not less than 1.5 sec

Start-up delay

< 1.5 sec

Operating conditions

-50° C / + 50° C, humidity up to 98%

Customer reviews

No reviews were found for Salamandra Safety - Model AGS-11/2 - Aerosol Fire Extinguisher AGS-11/2. Be the first to review!