Salamandra Safety

- Model AGS-6 - Aerosol Fire Extinguisher AGS-6

0
AGS-6 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration. Generator is made in a shape of cylinder with metal body which has outlets on the whole lateral surface. It has a low temperature of the outgoing aerosol stream due to the cooling unit which is located inside. The electrical impulse which comes to the starter * which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle. This generator is recommended for use as part of fire extinguishing systems in the premises of medium volume.

Technical characteristics

Fire classes

Fire Class A Fire Class B

Aerosol generating cartridge weight

3.5 kg

Protected volume

52 m3

Net weight

12.5 kg

Diameter - Height

167 mm x 420 mm

Time of operating

37 sec

Starter

VR-7.5, VRTH

VEL, VELTH

Starter impedance

7.5 Ohm

2.5-4 Ohm

Starter minimum current

1?

0,4 ?

Starting voltage

8 – 30 V

1,5 – 24 V

Duration of the starting impulse

Not less than 1.5 sec

Not less than 0.1 sec

Delay of generator start up

< 2,0 sec

Operating conditions

-50° C / + 50° C, humidity up to 98%, mechanical influence at frequency range up to 100 Hz – 1 g.

* The starter type is chosen by the Buyer

Customer reviews

No reviews were found for Salamandra Safety - Model AGS-6 - Aerosol Fire Extinguisher AGS-6. Be the first to review!