Shelco Filters

- Model MAS Series - PES Membrane – Beverage Grade Filter Cartridges

From

0

Polyethersulfone Absolute Rated Membrane Filter Cartridges for Reduction of Microbiological Contaminants. Specifically designed for reduction of bacteria and spoilage organisms in beverage applications. High surface area polyethersulfone membrane filter cartridges for maximum throughput and service life in beverage applications. Validated for removal of bacteria and spoilage organisms. Absolute retention from 0.1 to 1.2 microns. 100% flushed and integrity tested to ensure rated pore size. Manufactured in Class 10,000 clean room for highest purity. Meets applicable CFR criteria and USP Class VI Biological Test for plastics. Suitable for steam or autoclave sterilization and hot water or chemical sanitization. Each filter lot coded for product tracing and comes with certificate of quality assurance.

  • Absolute retention ratings from 0.1 to1.2 microns
  • 7.2 square feet (0.67 m2) of media surface area per ten inch length for optimal performance
  • Fully integrity tested to ensure reliable performance in critical applications
  • 100% flushed with 18 megohm DI water for low extractables
  • Rigid, molded cage protects pleated media and strengthens structural stability
  • Manufactured in a Class 10,000 Clean Room environment for high purity
  • Complies with Food & Drug Administration’s CFR criteria for food & beverage contact
  • Meets USP Class VI Biological Test for plastics
  • Available in standard lengths and end cap configurations to fit most filter housings
  • Produced up to 40 inches in length (10 inch modules)

  • Food & Beverage
  • Wine
  • Malt Beverages
  • Bottled Water
  • Beer
  • Process Water
  • RO Pre/Post Filtration
  • Water & Wastewater

  • Pore Sizes 0.1, 0.2, 0.45, 0.65, 0.8, 1.0, 1.2 microns absolute retention
  • Nominal Lengths 9.75” (24.7 cm), 10” (25.4 cm), 20” (50.8 cm), 30” (76.2 cm), 40” (101.6 cm)
  • Outside Diameter 2.67” (6.78 cm)
  • Inside Diameter 1.0” (2.54 cm)
  • Media Surface Area 7.2 sq.ft. (0.67 m2) per 10 inches filter length
  • Gaskets/O-rings
  • Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (O-rings only)
  • Materials of Construction
    • Filter Media: Polyethersulfone
    • Outer Cage Polypropylene
    • Inner Core: Polypropylene
    • End caps: Polypropylene
  • Maximum Operating Temperature 176°F ( 80°C)
  • Recommended Change-out Differential Pressure
    • 35 psid (2.4 bar)
  • Maximum Differential (Collapse) Pressure
    • 75 psid @ 70°F (5.2 bar @21°C), 40 psid @176°F (2.8 bar @ 80°C)
  • Sanitization and Sterilization
    • Hot water at 175°F (80°C) at 5 psid for 30 minutes
    • In-line steam at 257°F (125°C) @ 1 psid (0.7 bar) for 30 minutes
    • Autoclavable at 257°F (125°C) for 30 minutes
  • FDA and USP Compliance
    • All filters are manufactured of virgin polypropylene materials with no additives or other manufacturing agents. All polypropylene materials comply with the requirements of Food and Drug Administration Title 21 of The Code of Federal Regulations 174.5, 177.1520 and 177.1630. All components meet current USP Class VI biological tests for plastics

Customer reviews

No reviews were found for Shelco MicroVantage™ - Model MAS Series - PES Membrane – Beverage Grade Filter Cartridges. Be the first to review!