Environmental Industry Equipment
-
ShowcaseManufactured by ODLABbased in SOUTH KOREA
Used Graphite material instead of aluminum to prevent heavy metal pollution. Teflon-coating prevents corrosion due to harmful gas. Block type production maximizes digestion efficiency to reduce digestion time. Used high purity PFA Teflon acid sample digestion vessel. Compatible with pressure digestion vessel and general beaker. Tailored production possible for Graphite block. Applied 24 sample ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by OSEI - Oil Spill Eater International, Corpbased in USA
Oil Spill Eater II (OSE II) is the world’s most environmentally safe and cost effective bioremediation process for the mitigation of hazardous waste, spills and contamination virtually anywhere of any size, large or ...
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
Showcasebased in NETHERLANDS
H2O can provide electrochlorination systems. Our partners had build up a long reference list of worldwide instralled installations. The range of Electrolyzers are designed for low-maintenance Sodium Hypochlorite (NaOCl) production for on and offshore application.We can also be supplied for non-hazardous and hazardous. The systems can be supplied for installation in both classified and ...
-
Showcasebased in NETHERLANDS
To guarantee an efficient biofouling control from a dosing point onwards it is crucial to expose all the intake and water system surfaces to the dosed biocide products. H2O designs and engineers biocide dosing systems to achieve an optimal dispersion and effectiveness from dosing system onwards. This is part of the services we can provide with ...
-
ShowcaseManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept ALTS was developed by Concept for the Royal Air Force to enable the fast and accurate leak testing of its wide-bodied aircraft. The ALTS produces a sub-micron, non-contaminating, artificial smoke (entrained in inert carrier gas) in the aircraft fuselage, utilising the aircraft’s own 115v 400-450 Hz supply. The unit will also operate on 50 Hz. The unit uses the same chemical ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by ENVICON GmbHbased in GERMANY
ENVICON EMS membrane disc diffusers with the outer diameters 330 mm (12”) and 270 mm (9”) are available in various membrane materials and with various membrane fastening systems. The membranes of the 12” diffusers can be easily replaced on site and without the need for special ...
-
ShowcaseManufactured by Texas Boom Company LLCbased in USA
Type I turbidity curtains (also commonly referred to as Type 1 and silt curtains) are intended to control sediment and runoff in calm waters. These turbidity curtains are built with foam-filled floats that are referred to as Freeboards, combined with skirts that typically range in height from 3 to 20 feet. These floating silt curtains impede the flow of silt or sediment that may be suspended in ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
ShowcaseManufactured by Galaxy Scientific Incbased in USA
The QuasIR 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer without the ...
-
ShowcaseManufactured by FFP Systems Inc.based in CANADA
Find out more about filter press and slurry dewatering system here at FFP Systems Inc. We are a company in Mississauga, ON that provides an extensive selection of industrial filtering systems. Continue reading through our website to learn more about the filter press feed cycle and its important ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
-
ShowcaseManufactured by Excalibur Water Systems Inc.based in CANADA
The Excalibur Water Systems Industrial Clean-In-Place System facilitates the cleaning and restoration of reverse osmosis membranes by purging the foulants that develop during regular equipment operation. This operation restores a degree of a membrane’s performance while eliminating the need to manually remove the membranes to clean or replace them. CIP models can manage varying degrees of ...
-
ShowcaseManufactured by ACA Industrybased in DENMARK
The ACA crusher separates the wrapping from the foodstuffs, e.g. chocolate, chips, bread, fruit, etc. for subsequent recycling. The crusher is particularly well suited for crushing of foodstuffs, chocolate, chips, sweets, bread, fruit, etc. After eliminating the wrapping, the foodstuffs can be recycled as animal feed. The ACA crusher is a slow-turning, quiet machine. The size of the output can be ...
-
ShowcaseManufactured by HI-Q Environmental Products Company, Inc.based in USA
If you require visual accuracy over a large flow range, or wish to calibrate a number of air flow units consisting of more than one flow range, select HI-Q’s Dual Range AFC. The Dual Range unit consists of two pressure differential gauges installed in a single cabinet, that precisely measures both the low and high rate of air through a single venturi. ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you