LNI Swissgas

- Model 6000 C1 - Permeation Multigas Calibrator

From

0

The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency of the NOx monitors. The interface allows to Configure the calibrator and to perform the manual operations of calibrations and GPT necessary after the maintenance process on the analysers.

Equipped with a binary gas mixer, based on high precision mass flow controllers and mechanical pressure regulators the SONIMIX 6000C1 can generate accurate dilution to low ppb level.

Options :

  • Permeation oven of different sizes and material (up to 3 permeation oven per device), with a specific oven able to contain up to 6 BTEX permeation tubes.
  • Ozone generator and GPT circuits.

  • Air pollution monitoring

  • Permeation
  • Mass Flow Controller technology
  • Remote control
  • Ergonomic with LCD display

Models: Sonimix 6000 C1

General data:

  • Dilution range: 1/1000 to 1/30
  • Dilution principle: MFC
  • Dilution gas: Mixtures of : SO2 in air (25 to 100ppm), NO in N2 (25 to 100ppm), CO in air (1000 to 10000ppm), HC or BTX in air
  • Warm up time: < 45 min
  • Stabilization time: < 1 min
  • Operating temperature: 5°C – 40°C
  • Dimensions: 19″ 3HE/84 TE , 500mm deep
  • portable casing in option
  • Net weight: 15 – 20 Kg

Gas inlet requirments:

  • Diluted gas flow: 0 to 35 Nml/min air (other values available)
  • Pressure: 3 +/- 0.3 bar rel (29 +/- 5 psig)
  • Diluted Fittings: 1/8’’ Swagelok
  • Carrier gas: High grade zero air from pressurised cylinders or from Sonimix 3057
  • Air Flow:  0 to 5000 Nml/min air (other values available)
  • Pressure: 3 +/- 0.3 bar rel (29 +/- 5 psig)
  • Air Fittings:  1/4’’ and 1/8’’ Swagelok
  • flow accuracy: 0,5% rel + 0,1 FS
  • Repeatability on flow: 0,2% rel + 0,1 FS

Gas outlet:

  • Flow:: 0,5 to 5 l/min, other values upon request
  • Fittings: 1/4’’ Swagelok

O3 section

  • O3 concentration: 50 – 500ppb, adjustable by software, remote & local (other values upon request)
  • Repeatability on flow: Better than +/- 2ppb (at 200ppb O3)

Permeation tubes section:

  • SO2 permeation tube: 50 to 250 ppb (standard values)
  • NO2 permeation tube: 100 to 500 ppb (standard values)
  • BTX permeation tube: 10 to 50 ppb (standard values)
  • Temperature of permeation tube oven: 45°C
  • Temp. Stability of permeation tube oven: 0.05°C

Communication:

  • RS232: Standard

Electrical data:

  • Power supply voltage:
    • 230V/50-60Hz
    • 115V/60Hz
    • 100V/50-60Hz
  • Installed power (Max): 200W

Customer reviews

No reviews were found for Sonimix - Model 6000 C1 - Permeation Multigas Calibrator. Be the first to review!