SubSurface - Model LC-2500 - Leak Noise Correlator
From Correlators
Large LCD Display readable in very cold and hot temperatures.
-
Most popular related searches
Products Details
Compact and Light-Weight
The Main Processor Unit, weighing less than 7 lb., can easily be carried all day.
Ruggedly Built and Weather-Tight
The Main Processor Unit and the Pre-Amps/Transmitters can operate in rain storms, sub-zero temps., and direct sun for hours.
High Sensitivity Sensors Standard
The new LC-2500 sensors are very sensitive, small in diameter, and totally submersible.
No Built-In Rechargables
Runs all day on standard or rechargeable “D” batteries.
Easy to Set Up and Run
Input pipe materials, diameters, and lengths by simply selecting them in the program menus. The automatic functions can do the rest.
LC-2500 Main Processor Unit
- LC-2500 Main Processor Unit
- Blue Pre-Amplifier with Radio Communication
- Red Pre-Amplifier with Radio Communication
- Two High Sensitivity, Small Diameter Sensors for Metal Pipes
- Aviation-Grade Headphones
- Instruction Manual and Field Guide (not shown)
- Two “Heavy Duty” Plastic Carrying Cases
Optional Accessories
- Two Red Sensors for PVC Pipes, “Poly” Services, and Large Diameter Mains
- LC-2500 Windows™ PC Software (for downloading)
Specification
MAIN PROCESSOR UNIT
Operating Temperature Range: -10 to 50°C
Applicable Standard: IP52 (weather tight)
External Dimensions: 7.8 inches (W) x 4.0 inches (D) x 9.9 inches (H)
Weight: Approx. 6.8 lb. (with batteries)
Battery: 4 “D” Cells (std or rechargeable)
Continuous Operating Time:
13 hours minimum (at 20°C, backlight OFF)
Minimum Operating Voltage: 4.2V
Input: Radio or Cable
Display: Dot matrix LCD
Operation: Polarity correlation
Td Range:
±50ms, ±100ms, ±200ms, ±400ms,
±800ms, ±1600ms or automatic setting
Time Resolution:
25 µs (in ±50ms range),
50 µs (in ±100ms range),
100 µs (in ±200ms range),
200 µs (in ±400ms range),
400 µs (in ±800ms range),
800 µs (in ±1600ms range)
Filter Range: THRU, 80Hz to 5,000Hz
(4 low and 4 high)
Notch filter: OFF, 50Hz, 60Hz
Auto Filter: Automatically selected from FFT operation
Data Memory: 100 correlations
FFT Monitor: 1kHz, 2.5kHz, 5kHz
(common to both channels)
Sound memory: For 16 seconds
External Interface: RS-232C
RED and BLUE PRE-AMPLIFIERS
Operating Temperature Range: -10 to 50°C
Applicable Standard: IP52 (weather tight)
External Dimensions : 5.9 inches (W) x 4.3 inches (D) x 14.5 inches (H)
Weight: Approx. 6.3 lb. (with batteries)
Battery: 6 “D” Cells (std or rechargeable)
Continuous Operating Time: 10 hours minimum (at 20°C, backlight OFF)
Minimum Operating Voltage: 6.0V
INPUT:
Input Frequency Range:
20Hz to 5kHz (at THRU filter setting)
100Hz to 5KHz (at STD filter setting)
Input Sensitivity: 50 micro V, max.
Signal to Noise Ratio: 35dB, min.
RADIO COMMUNICATION SYSTEM:
Output Frequency:
UHF under approved freq.
Modulation: Direct frequency modulation
Output Power: 0.5W (500mW)
Output Impedance: 50 ohms
SENSORS
Type: Piezoelectric pick-up
Voltage Sensitivity : 2.5V/g (peak)
Applicable Standard: IP68 (water-proof)
Drop Resistance: 3 feet (asphalt)
External Dimensions: 1.2 inches diameter x 5.1 inches high
Weight: 15 ounces each
Power Supply System: 3-wire
Output Impedance: 100 ohms, max.
Power Supply Voltage: 5.0V
Customer reviews
No reviews were found for SubSurface - Model LC-2500 - Leak Noise Correlator. Be the first to review!