Sundyne Corporation

- Model BMC-34X Type A - Single Stage Centrifugal Compressor

From

0

The BMC-34X TYPE A is an API 617 compliant horizontal integrally geared single-stage centrifugal compressor. Flows to 3,550 ACFM (6,030 AM³/hr), Max working pressure 1,600 psig (110 barg).

Based on more than 50 years of technological innovation, the Sundyne BMC integrally geared centrifugal compressor is precision engineered to provide pulsation- and vibration-free operation. Built to meet exacting API-617 / ISO 10439 standards, the BMC will run continuously for 5 years, delivering oil-free process gas with no emissions. These compressors are designed to meet the unique Best Efficiency Point (BEP) of each customer’s application, resulting in a tailor made solution that reduces process loss and eliminates emissions. Additionally, these horizontally configured compressors are ideal for skid packaging — due to their unique modular baseplate — and are easy to install into any process environment. Backed by our global network of Authorized Service Centers, Sundyne BMC compressors are the ideal solution for handling the most demanding high-head, low-flow applications in the refining, petrochemical, LNG, power and mining industries.

  • Maximum Flow 3,550 acfm 6,030 am³/hr     
  • Maximum Speed  34,200 rpm-60Hz 33,600 rpm-50Hz     
  • Maximum Working Pressure  1,600 psi 110 bar     
  • Temperature Range  -200 to 500°F -130 to 260°C     
  • Maximum Motor Size  450 hp 335 kW     
  • Hydro Test Pressure  1.5 Times Maximum Working Pressure
  • Min Casing Thickness  0.75 in 19.05 mm     
  • Corrosion Allowance  0.125 in 3.18 mm     
  • Impeller Clearance  0.03 to 0.05in 31.8 to 38.1mm     
  • Shaft Diameter at Bearings  1.5in (38.1mm)
  • Mechanical Seal Sizes-Outboard... 1.5 in 38.1 mm     
  • Mechanical Seal Sizes-Inboard  1.5 in 38.1 mm     
  • Mounting  Horizontal
  • Flanges  600# ANSI RF standard, other ratings available
  • Suction Flange  3, 6, and 8 in
  • Discharge Flange  2, 4, and 6 in.
  • Gearbox Oil Temp Range (normal... 120 to 140°F 49 to 60°C     Consult Factory
  • Minimum Gearbox Starting Temp  32°f (0°C) with light turbine oil, lower with approved synthetic oil
  • Gearbox Lubricant  ISO VG-64 General Purpose Oil
  • Gearbox Sump Capacity  Per API 614
  • Gearbox Lube System  Pressurized
  • Gears  Hardened and precision ground, helical AGMA class 13
  • Input and Idler Bearings  Spherical roller element (input), hydrodynamic (idler and output). Min 5 year uninterrupted service.
  • Output Bearings  Solid Journal or Tilt Pad thrust and radial as required
  • Coupling  Spacer Type
  • Materials of Construction  Carbon Steel, Stainless Steel castings, 17-4PH, Titanium impellers

  • Atomizing Air
  • Petroleum Production and Refining
  • Evaporators
  • Butane
  • Nitrogen
  • Power Generation
  • Natural Gas Extraction
  • Flue Gas Desulphurization
  • HC Boost
  • Acetylene
  • Hydrocarbon Processing
  • Fuel Gas
  • Purge Gas
  • Chemical Transfer
  • Recycle
  • Stripper Overhead
  • Gasification
  • Waste Gas
  • Pipeline Booster
  • Chlorine
  • Hydrogen
  • Acetic Acid
  • Natural Gas
  • Gas Production
  • Ethylene
  • Vapor Recovery
  • Refrigeration
  • General Processing Industry
  • Polypropylene
  • Clean Fuels
  • OEM
  • Lift Gas
  • H2S Wet Gas
  • Gas Boost
  • Desulfunzation
  • Chemical Processing
  • Corrosive Gases
  • Ammonia
  • Regeneration
  • MTBE Replacement

Customer reviews

No reviews were found for Sundyne - Model BMC-34X Type A - Single Stage Centrifugal Compressor. Be the first to review!