Tana Oy

- Model E380eco - Landfill Compactor (Tier 4 Final)



Unique design. Twin drums Fewer passes, smooth and dense surface. Rigid frame Best crushing force. Crushing teeth Optimized size, shape and number for optimized spreading and crushing of waste. Tana Smart Site Basic to minimize downtime and improve cost analysis.

General Information

  • Weight: 38 000 kg
  • Total length: 9 050 mm
  • Total width: 4 500 mm
  • Total height: 4 320 mm
  • Wheel base: 4 050 mm
  • Ground clearance: 890 mm
  • Length without dozer blade: 7 430 mm
  • Width without dozer blade: 4 390 mm
  • Inside turning radius: 3 310 mm
  • Driving speed ranges: 0–5 km/h 0–7 km/h
  • Maximum crushing force: 186 kN

Compaction drums
Uniform full width drums with forged solid steel crushing teeth. Adjustable scraper bars on both sides of the drums and adjustable steel wire cutters in the ends of drums.

Front/rear drum

  • Crushing/compaction width: 2 660 mm/3 800 mm
  • Diameter including crushing teeth: 1620 mm/1620 mm
  • Number of crushing teeth: 80 pcs/110 pcs
  • Height of crushing teeth: 200 mm/200 mm
  • Number of scraper bars: 14 pcs/20 pcs
  • Number of wire cutters: 2 pcs/4 pcs

Dozer blade
The dozer blade is operated with two hydraulic cylinders and it is equipped with two arms. Arm joints are with hardened pins and spherical bearings.

  • Width: 4 500 mm
  • Height: 1750 mm
  • Movement above ground level: 1 170 mm
  • Movement below ground level:  150 mm
  • Upper part of blade: trash screen
  • Bolt-mounted reversible cutting edges

The frame is constructed of two modular drum frames connected together with a longitudinal upper frame. The drum frame acts as a shell around the drum, which helps to prevent waste raising to the upper parts of the machine from below.

  • The upper frame is equipped with center point articulated steering operated with two hydraulic cylinders.
  • Articulation links are equipped with hardened pins and spherical steel bearings
  • The angle of articulation to the left or right is 40 degrees

Service platforms and protection
Service platforms and steps are equipped with banisters and anti-slide surfaces. Engine and powerpack are protected with lockable hood (bonnet). Opening of hood is made easier by using wind hooks.

  • Vandalism protection
  • Lockable cabin, engine compartment and fuel tank filling cap
  • Electronic key for ignition


  • Cummins QSX15-C450
  • Turbo charged, 6 cylinders in line, water-cooled, after-cooled, four-stroke diesel engine
  • Fulfills U.S. EPA Tier 4 (f), CARB Tier 4 and EU Stage IV nonroad emission certificates
  • Maximum power: 500 BHP (373kW) @ 1 800 RPM
  • Power rating: 450 BHP (336kW) @ 2 100 RPM
  • Maximum torque: 2 305 Nm (1 700lb-ft) @ 1 400 RPM Engine equipment
  • Attachment to the frame with vibration and noise damping rubber mounts
  • Service indicator
  • Dry-type air cleaner with replaceable primary and safety element
  • Fuel filter and water separator
  • Oil filter 1 pc
  • Radiator + separate charge air cooler
  • Aftertreatment system


  • Pressurized, heat and sound insulated cabin with cabin lights
  • Insulation materials in accordance with ISO 3795
  • Air-suspended swivelling operator’s seat with head rest, built-on controls, seat heating and seat belt
  • Laminated safety glass windows
  • Socket for mobile phone charger, radio/CD/USB player
  • Front and rear windshield intermittent wipers and washers, suncover in front
  • Heater and A/C unit
  • Emergency exit, lockable door, shelf and lockers, external rear window mirrors, foot support, inside mirror
  • Replaceable cabin air filters
    • pre-filter grade EU3
    • micro filter grade EU7, grade EU14 (option)
    • active carbon filter (option)

Gauges included in TANA Control System (TCS)

  • Engine oil pressure, temperatures for engine intake manifold, engine oil and hydraulic oil, coolant and hydraulic oil
  • Final drive gearbox temperatures
  • Fuel level, total fuel consumption
  • Voltage, tachometer, boost pressure, engine working hours
  • Engine load rate
  • System warnings in TCS (indicator light, acoustic warning and alarm log)
  • Engine air filter contamination
  • Hydraulic oil temperature
  • Low hydraulic oil level
  • High hydraulic oil contamination
  • Fuel level
  • Gear box temperature
  • Hydraulic oil return line filter clogging
  • Charge pressure filter contamination
  • Low charge pressure
  • Voltage
  • In addition to above all the alarms from the diesel engine control module (95 different alarms, including low engine oil pressure, high coolant temperature, etc). Totally more than 500 alarms.


  • Transmission on/off and parking brake
  • Emergency shut down
  • Ignition switch: power on/off and starting
  • Heater and air conditioning, cabin temperature control
  • Windshield wipers and washers, lights

Joystick controls integrated in arm-rests

  • Return to neutral position automatically when released and all related movements will cease
  • Left hand joystick for control of driving speed and direction as well as control of optional bucket and speed range selection by pressing a button
  • Right hand joystick for control of steering, dozer blade and horn


  • Integrated in cabin structure
    • ROPS in accordance with ISO 3471:2008
    • FOPS in accordance with ISO 3449:2005
  • Tana Smart Site Basic
    • Offers on-line information
    • Monthly operational reports
    • GPS available

  • Closed circuit, hydrostatic transmission
  • Separate systems for both drums
  • Two driving speed ranges
  • Control of driving speed and direction with one lever
  • Stepless speed control


  • One tandem pump arrangement
  • Variable displacement axial piston pumps with electrical proportional control


  • Three variable displacement plug-in motors

Cooling of hydraulic system

  • Air-operated oil cooler
  • Openable air filtration screen

Hydraulic oil filtration

  • Return line filter and two charge pressure filters, hydraulic oil filling filter

Final drive gear boxes

  • Transmits hydraulic output to the drums
  • Three-stage planetary gearboxes (2 pcs)
  • Integrated hydraulic oil pressure released multi-plate parking brake
  • Splash lubrication system


  • Service brakes: hydrostatic transmission acts as service brakes, separate circuits for both drums
  • Parking/emergency brakes: hydraulic oil-released, spring-actuated multi-plate parking brake integrated in planetary gear boxes

Auxiliary Hydraulics
Open circuit system with electro-hydraulic load sensing (LS) control.


  • Variable displacement axial piston pump

Directional control valve

  • Electro-hydraulic proportional control

Hydraulic oil tank
The hydraulic oil tank is located inside the engine hood

  • Electrical filling pump with filter
  • Oil level sensor with alarm
  • Breather filter

Fuel Tank

The 760 l tank is located inside the upper frame under the operator cabin

  • Lockable filling cap
  • Service hatch
  • Suction strainer
  • Drain valve
  • Level sensor with alarm

Urea Tank
The 56 l tank is located inside the rear frame. It is equipped with a suction strainer and level sensor with alarm.

Electrical Equipment

  • 24 VDC system
  • Batteries 12 V 180 Ah, 2 pcs
  • Lights: front 4 pcs, rear 4 pcs
  • Horn
  • Socket for hand light in engine compartment
  • Back-up alarm, main circuit breaker, voltage reducer for radio

Customer reviews

No reviews were found for Tana - Model E380eco - Landfill Compactor (Tier 4 Final). Be the first to review!