Tana Oy

- Model H260 - Landfill Compactor


Weight: 26000 kg. Total length: 8 260 mm. Total width: 3 660 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 830 mm. Length without dozer blade: 6 730 mm. Width without dozer blade: 3 250 mm. Inside turning radius: 3 880 mm. Driving speed ranges: 0-4 km/h 0-10 km/h. Maximum crushing force: 127 kN.

Compaction Drums
Uniform full width drums with forged solid steel crushing teeth. Adjustable scraper bars on both sides of the drums and adjustable steel wire cutters in the ends of drums.

  • Crushing/compaction width: 2 660 mm/2 660 mm
  • Diameter including crushing teeth: 1 620 mm/1620 mm
  • Number of crushing teeth: 80 pcs/80 pes
  • Height of crushing teeth: 200 mm/200 mm
  • Number of scraper bars: : 14pcs/14pcs
  • Number of wire cutters: : 2 pcs/4 pes

Dozer Blade
The dozer blade is operated with two hydraulic cylinders and it is equipped with two arms. Arm joints are with hardened pins and spherical bearings.

  • Width: 3 660 mm
  • Height: 1750 mm
  • Movement above ground level: 1 170 mm
  • Movement below ground level: 150 mm
  • Upper part of blade: trash screen
  • Bolt-mounted reversible cutting edges

The frame is constructed of two modular drum frames connected together with a longitudinal upper frame. The drum frame acts as a shell around the drum, which helps to prevent waste raising to the upper parts of the machine from below.

The upper frame is equipped with center point articulated steering operated with two hydraulic cylinders.

  • Articulation links are equipped with hardened pins and spherical steel bearings
  • The angle of articulation to the left or right is 40 degrees

Service Platforms and Protection
Service platforms and steps are equipped with banisters and anti-slide surfaces. Engine and powerpack are protected with lockable hood (bonnet). Opening of hood is made easier by using wind hooks.

Vandalism Protection

  • Lockable cabin, engine compartment and fuel tank filling cap
  • Electronic key for ignition

Cummins QSL9-C250

  • Turbo charged, 6 cylinders in line, after-cooled electrically controlled diesel engine that communicates with the TCS system
  • Fulfills Tier 3 and EU Stage IIIA non-road emission certificates
  • Maximum power: 253 kW (340 bhp)/1 900 RPM
  • Power rating: 250 bhp (186kW)@2000 RPM
  • Maximum torque: 1085 Nm (800 lb-ft)/1 400 rRPM

Engine equipment

  • Dry type air cleaner with replaceable primary and safety element
  • In-built pre-cleaner and service indicator
  • Fuel filter and water separator 1 pc
  • Oil filter 1 pc
  • Exhaust muffler
  • Radiator + separate charge air cooler
  • Starter motor 24V
  • Alternator 24 V, 70 A

Customer reviews

No reviews were found for TANA - Model H260 - Landfill Compactor. Be the first to review!