Turner Designs Hydrocarbon Instruments, Inc.

- Model TD-4100XD - General Purpose Monitor

The TD-4100XD General Purpose monitor is a lower cost version of the industry standard TD-4100XD and is designed for use in non-explosive atmospheres. It was designed for dirty water applications and uses our standard EZ Access noncontact flow cell for lower maintenance. Field validation is via our CheckPOINT™ solid calibration check standard.

  • Fluorescence measurement technology with lowest detection limits available
  • Minimal sample conditioning plumbing hardware reduces cost
  • Easy calibration with long term stability
  • Low maintenance
  • User friendly. E09 Electronics Package
  • Ruggedized for harsh environments, non-hazardous areas
  • Custom configurations and wetted materials

  • Applications: Steam Condensate, Boiler Feed, Normally Clean Water, Cooling Water, Intake Protection and Dirty Water with Chemical cleaning if needed
  • Hydrocarbons: Fuel Oil, Crude Oil, Other Fuels and Lubricating Oils, Phenol, Styrene, Most Heat Transfer Fluids, Aromatic Chemicals, BTEX
  • Detection Range: Fuel Oil, Crude Oil 5 ppb - 500 ppm in steam condensate
  • Low Detection Limit: Most Other Hydrocarbons < 50 ppb
  • Dimensions (Wall Mount): 44' Hx44' Wx 12.5' D (1118 mmx 1118 mmx 317 mm)
  • Weight: 65 lbs (30 kg)
  • Local Display: Yes, PPM, PPB, or Raw Signal
  • Controls: External 316 SS Touch Pad
  • Power Requirement: 90 - 240 VAC, 50/60 Hz +/- 10%, 184 W, 1 ph, (24 VDC Optional)
  • Plumbing Requirements: Feed: 1/2' FNPT Return: 1- 1/2' FNPT Pipe
  • Sample Inlet: < 20psig (1 38 kPag) (For higher pressures consult factory)
  • Feed: 1/2' FNPT Return: 1- 1/2' FNPT
  • Sample Outlet Pressure: Atmospheric (standard) or optional sample return pump
  • Sample Temperature: 140 °F (60 °C) (For higher temperatures consult factory) 2 - 3 US gallons/min [7.5 -11.5 L/min], optional sample pump
  • Required Inst. Air Supply General Purpose: 10 - 20 SCFH (0.28-0.57 m3/hr)
  • Ambient Operating Temperature: -4 to 131 'F (-20 to 55 'C) (Heater or Vortex Cooler Optional)
  • Flow Cell Characteristic: Non-Contact EZ Access
  • Pressurized Sample Return: Yes, with optional sample return pump
  • Operational Principle: UV Fluorescence with application specific optical configurations
  • Calibration Stability: +/- 10% over 6 Months or better
  • Response Time: 3 seconds full scale spike change, continuous reading
  • Calibration: Blank / standard addition or correlation to standard methods linear or non-linear
  • Field Validation: Via CheckPOINT Solid Check Standard
  • Reagents: None
  • Alarms: Baseline, early warning, high alarm, system-function, local display and audible tone
  • Alarm Contacts: Four user-sertable, independently-protected dry contact relays
  • Communication: Standard E09 features with 4-20 mA isolated, 500 ohm impedance, selectable between Loop Powered and Instrument Powered, Ethernet. Optional HART, ModBus
  • Diagnostics: System failures reports to relay and local display
  • Security: Two level password protected, lockable cabinet
  • IP Rating: IP 66, NEMA4X (Standard)
  • Maintenance: Calibration check, Clean Sample System
  • Hazardous Area Options: Use TD-4100 XD with proper rating
  • Sample Pump: Optional
  • Cleaning System: Optional
  • Data Logger: Standard - see E09 Data Sheet
  • ISO Certified 9001: 2008 Quality System

Not for use in explosive atmospheres

Produced Water

  • Overboard discharge compliance and process control
  • Re-injection or water flood water quality control
  • Produced water reuse – RO feed water, steam generator feed water
  • Noncontact cooling water

Heat Exchanger Leak Detection

  • Boiler feed protection
  • Cooling tower protection
  • Open-loop discharge

Wastewater

  • Process water discharge
  • Industrial discharge

Marine Water

  • Drilling and production rig slop tanks/deck drains
  • Bilge water discharge
  • Ballast water discharge

Other Water Types

  • Hydroelectric water
  • Storm water
  • Groundwater
  • Municipal wastewater
  • Potable water

Hydrocarbons Detected

  • BTEX
  • Gasoline
  • Diesel
  • Jet fuel
  • PAH’s (polycyclic aromatic hydrocarbons)
  • Creosol
  • Crude oil
  • Heat transfer fluids
  • Aromatic solvents
  • Aromatic chemicals (styrene, phenol, etc.)
  • Lubricating oils
  • Fuel oil
  • Longwall fluid