TurfMaker Corporation

- Model 800 - Hydroseeder Machine



The TurfMaker  800 hydroseeder is large enough to provide thick wood mulch applications on small home lawn sites, or thin “hydro-seeding” applications on as much as 25,000 square feet.  Either tank load can be loaded, mixed, and applied in less than thirty minutes. In addition, up to as many as 20 tank loads can be applied in a normal workday, assuming water for re-filling is readily available. Availability of water is never a problem with a TurfMaker ® 800. The best productivity is usually accomplished utilizing a fire hydrant for loading. However, when a fire hydrant is not available, the machine can fill itself from an auxiliary water tank using the exclusive TurfMaker ® self-filling system.

The TurfMaker 800 hydroseeder, with its powerful, direct-drive mechanical agitation system can quickly mix up to 325 pounds of 100% Wood Fiber Mulch or up to 500 pounds of shredded paper in one tank load. With the positive displacement pump, thick mulch slurries can be pumped through up to 500 feet of hose, and then spray more than 75 feet from the end of the hose. For the best and highest quality applications, tackifiers are always recommended. Slicky Sticky is a leading erosion control tackifier product that also makes the slurry extremely slick, reducing or eliminating clogs completely. Slicky Sticky also increases moisture retention and enhances seed germination.

The TurfMaker 800 hydroseeder can be mounted on a heavy duty flat bed truck, on a heavy-duty utility trailer, or can be purchased on the custom heavy duty two axle trailer shown above. The TurfMaker 800 hydroseeder is large enough to cover a lot of area with one tank load, and small enough to be taken into places larger machines can’t go. It provides fast and efficient performance with wood mulch for the quality-minded landscaping contractor.


  • Powerful Mechanical Agitation
  • Positive Displacement Gear Pump
  • Optional Clear Water Hose Flushing System
  • Optional Self Filling with Auxiliary Tank
  • Optional Trailer (Two 6,000 lb Axles w/Brakes)
  • Optional Tower (not shown)


  • Wood Mulch (100%) – 350 lbs per tank load
  • Paper Mulch – 400 lbs per tank load
  • Blended Mulch – 350 lbs per tank load
  • Bonded Fiber Matrix – 350 lbs per tank load

Total Capacity – Total Gallons: 800
Approximate Empty Weight – Varies Depending on Options  2,500 lbs
Approximate Weight of Slurry in Tank  6,650 lbs
Approximate Loaded Weight – Varies Depending on Options  9,150 lbs
Typical Length with Most Engines  151″ – 163″
Skid Frame Width  47″
Overall Width  56″
Overall Height  61″

Standard Engine: Kohler CH 620. Other Engines Available.
Standard Pump: Rotary Gear, Positive Displacement
Trailer Option: Single Axle (5,200 lbs axle)

Customer reviews

No reviews were found for TurfMaker - Model 800 - Hydroseeder Machine. Be the first to review!