Tymco - Model 500x - High Dump Street Sweeper
The TYMCO Model 500x truly is refined perfection. We took the best of the Model 600 – unprecedented reliability and incredible power – and integrated cutting edge multiplex electronics and the industry’s highest dumping hopper lift assembly to build the most advanced high dump street sweeper available today. Whether you’re sweeping state highways, city streets or sweeping behind a milling machine or road reclaimer, any successful high dump sweeping program needs a reliable sweeper. The Model 500x is built using the high-efficiency, time-tested TYMCO Regenerative Air System that delivers rock-solid reliability and an amazingly clean sweep. With a fast dump cycle of less than 68 seconds and a soaring 11 foot dump height, the Model 500x provides more versatility than any other high dump street sweeper on the market.
TYMCO Sweepers are designed in way that truly reflects the culture at TYMCO. When our engineers approach a challenge or a need on the sweeper, they work to develop straightforward solutions. For example, all TYMCO Sweepers use True Regenerative Air. This design delivers the simplest approach as well as the highest performance with the lowest downtime as compared to other sweeper technologies.
- True Regenerative Air
- Smart Gutter Broom
- Easy Access to Components
- Operator Friendly Design
- High Productivity
- Low Maintenance
Broom Assist Pick-Up Head
The TYMCO Model 500x® is equipped with the Broom Assist Head (BAH) which incorporates full-width air blast and suction and is designed to work effortlessly with the TYMCO Regenerative Air System to pick up a wide variety of street debris from light trash and leaves to heavy dirt and gravel. The BAH is controlled by the operator in the cab by a single switch allowing broom-assisted sweeping only when needed because the majority of debris is removed by the powerful TYMCO Regenerative Air System.
The large 12” diameter by 79” long broom is mounted at the rear of the BAH and is fully enclosed for optimum dust control and eliminating risk of “throwing” debris outside the sweep path. The fast rotating BAH broom provides excellent performance by automatically applying as much pressure as needed to loosen heavy, packed-on debris and projecting it into the air blast for faster sweeping.
The BAH offers independent suspension of each broom end which provides longer broom bristle life and reduces the broom “coning effect” relative to the surface being swept. TYMCO’s simple design approach allows for BAH broom replacement in 30 minutes or less and without the need to remove the pick-up head.
The Model 500x pick-up head also comes standard with long-lasting Duo-Skids® which provide increased sweeping performance and longer wear.
Hopper and Chute
The Model 500x hopper capacity is over 5.7 cubic yards and ensures owners a payload of over 6000 lbs. All 500x hopper body sheets as well as the hopper screen are fabricated with low carbon, high chrome stainless steel providing additional longevity and easier cleanout of the hopper.
A variable dump height from 2 feet to 11 feet allows dumping into various size and type containers. The large hopper door allows easy dumping and is hydraulically and mechanically locked for an air and watertight seal.
The large stainless steel discharge chute project debris provides smooth discharge of debris into the middle of the dump container without the need of a hopper side shift. The chute is designed to float 45 degrees upward, preventing major damage should it come in contact with the debris container.
Hopper Lift Assembly
Has a 10,000 lb lift capacity. All pivots on the lift are self-lubricating and never require greasing. Integral counterbalance holding valves ensure controlled lowering of the lift assembly and serve as redundant safety locks. Dual stabilizers automatically deploy before the dump cycle begins assuring unit stability throughout the dumping procedure. The 500x is also integrated with the truck chassis transmission, only allowing dumping when the truck is in neutral with the parking break set.
The 43” diameter Model 500x gutter brooms remove debris from curbs, gutters and around obstacles along city streets such as parked cars and maintenance equipment.
An optional tilt adjuster allows you to reach down into the deepest curbs or gutters typically found throughout city industrial and residential streets. The innovative gutter broom provides excellent performance by automatically determining the “digging” pressure needed for different debris; therefore, owners get maximum gutter broom bristle life and sweeping performance. If the gutter broom encounters an immovable object, it will automatically retract to avoid potential damage and return to the original position once the immovable object has been passed, all without intervention from the operator.
The Model 500x is the only street sweeper on the market with a high-efficiency centrifugal dust separator for maximum fine dust particulate separation which provides excellent dust control while using less water.
TYMCO’s engineers take several aspects into account when designing for better dust control such as water nozzle design and placement, not just adding more water like other street sweepers. For example, if the operator has not engaged the blower, but the dust control system is on, the 500x “pauses” the dust control system until the operator engages the blower; therefore saving gallons of water that could have been wasted when the operator wasn’t sweeping.
The Model 500x has a water capacity of 250 gallons which provides hours of sweeping while maintaining excellent dust control.
The Model 500x is powered by a 115 horsepower John Deere auxiliary engine. This engine powers the blower and all hydraulic functions through three direct driven hydraulic pumps. TYMCO’s engineers designed the Model 500x with a single speed auxiliary engine; therefore reducing wear on the engine and conserving fuel by maintaining a constant speed.
The Model 500x is the only high dump street sweeper that utilizes a super-efficient aluminum alloy blower that is self-cleaning and reduces fuel consumption because of its lightweight design requiring less horsepower. The blower is designed to work with the TYMCO Regenerative Air System to both push and pull air which delivers even greater sweeping performance. The Model 500x blower has a natural rubber coating that provides maximum wear against abrasive debris.
The truck chassis mounted magnet assembly comes with in-cab controls for raising and lowering the magnet to the paved surface. The magnet is self-cleaning and comes in standard duty and heavy duty gauss strengths for removal of lighter or heavier ferrous metals.
Cities, streets, and roads are full of cars, maintenance equipment, signs, light poles, trees and many other objects that need to be seen when backing up.
The rear view back-up camera with in-cab display allows the operator to view the area behind the Model 500x while backing up providing additional safety and peace-of-mind to both Model 500x operators and owners. Additional cameras are also available to view the pick-up head and gutter brooms.
Drop Down Gutter Brooms
Allows for the gutter brooms to 'drop down' in front of the pick-up head so the metal bristles can scrub up extremely packed on material. Also allows very tight sweeping of curb lines to minimize amount of dust being kicked up before it is swept by the pick-up head.
In our continuing commitment to environmentally conscious sweeping, TYMCO offers a CNG (Compressed Natural Gas alternative fuel option for the Model 500x. The Model 500x CNG option is available as a Dedicated Unit, where both the sweeper and the truck chassis are CNG powered.
Pick-Up Head Curtain Lifter
Hydraulic actuated and retractable roller assembly that provides the pick-up head with the ability to sweep large volume of light debris. Electronically controlled in cab.
The Model 500x has several environmental benefits, features, and options including:
- Doing More With Less
- Water Efficiency
- South Coast AQMD Rule 1186 Certification
- Compressed Natural Gas (CNG)