AppliTek NV

- Model EX - Universal Process Analyzer On-line Salts in Crude Oil

From

0

The UPA on-line analyzer system for determination of salts in crude oil allows efficient control over the salt removal process in desalter units. The UPA system complements the common practice of interface level measurements, yet as a stand-alone system designed specifically for use in refineries. The necessity to withstand the harsh environment of desalting systems require that any analyzer system and components used for monitoring the desalter environment must be capable of continuous operation for a period of time. The explosion proof version of our multiparameter UPA Series is ideally suited for monitoring chloride levels and factory tested to fully meet ATEX or NEC 500 directives. The process analyzer is equipped with an integrated protective stainless steel enclosure controlled by an external purge and pressurization unit, as well as all necessary connections.

The analyzer’s sampling system is engineered for connection to the following sample take-off points:

  • Desalter feed line
  • Desalter outlet
  • Crude oil terminal (jetty)

Background

Crude oil desalters carry the important task to remove inorganic salts, water and sediment from the oil feedstock. Without these, chlorides generated would cause severe corrosion of pipe walls, heat exchanger tubes and shell, and other carbon steel components in which they come in contact during processing. Besides corrosion, expensive catalysts can be damaged due to the presence of chlorides. Salts are typically removed by creating an oil-water emulsion inside the desalter that is controlled by interface level measurements. Level measurements in desalters present a challenging application and are not always correct, resulting in desalters operating at low interface levels and compromised efficiency. The effectiveness of the salt removal process depends on controlling the emulsion layer in the desalter and/or analyzing on-line the salt levels.

Parameters: Calcium chloride, Chloride, Magnesium chloride, Sodium chloride

  • Analysis of salts in crude oil conform with ASTM D3230
  • Stainless steel ex proof cabinet (purged) complying with ATEX or NEC500 directives
  • Incorporated industrial panel PC (inside) with touch screen and excellent viewing angle
  • Extended functionality for programming and interfacing
  • Complete separation between electronics and wet part
  • Smart features and add-on units reduce down-time and unnecessary checks substantially
  • Up to six (6) sampling points possible
  • Incorporated industrial panel PC with AppliTek controller software
  • Extended data communication and exchange features

Analysis method
Determination of chloride (salts) in crude conform ASTM D3230

Measuring ranges
0 –15 PTB
0 – 400 PTB
0 – 1000 mg/liter salt

Cycle time
6 – 10 minutes

Sample Requerements
Sample pressure max. 14 kg/cm² (bar) or 200 psi
Sample temperature: 15° – 60°C or 60° – 140°F

Calibration – validation
Automatic by calibration/Validation program

Cleaning
Automatic, naphta per ASTM D91

Customer reviews

No reviews were found for UPA - Model EX - Universal Process Analyzer On-line Salts in Crude Oil. Be the first to review!