Naaktgeboren Rotterdam BV

- Model 10.000 Hi-Lift - Truck

0

The model of the Vacu-Press Hi-Lift is not only suitable as a single tipper but also able to discharge or unload in a Big-Bag or container. The double tipping-construction is exceptionally stable and secure, where also the rear of the tank can be raised up by means of two, synchronised hydraulic cylinders. Any sideward movement of the tank is prevented by a strong solid stabiliser on the rear.

The Vacu-Press Hi-Lift is a sucking/blowing installation suitable for the suction and blowing of dry and wet material. It is possible to build this construction on a truck chassis with different axle-configurations (3-, 4- or 5-axle).

The Vacu-Press truck is available in the following versions: ADR, suitable for transport of hazardous and contaminated material, class 3, 4.1, 5.1, 6.1, 6.2, 8 and 9. This installation is also available with an ATEX blower.

TANK

Stainless steel type-304

CHASSIS

4-axle tipper chassis

ENGINE

Diesel min. 360pk

PUMP

Air-cooled full-vacuum blower, type Vacu-Press® 10.000

FILTER

Continuous cleaning with compressed air (46 m²)

SAFETYFILTER

Stainless steel housing including stainless steel plate filter (150 micron)

DRIVING

Vehicle engine and transfer case

PAYLOAD

Approx. 14 m³

LOADED

Suction or through manhole

UNLOAD

Blowing, tipping or unload in Big Bag or container

Customer reviews

No reviews were found for Vacu-Press - Model 10.000 Hi-Lift - Truck. Be the first to review!