Model HI 5500 - Vibration Signal Conditioners
The Hardy HI 5500 series signal conditioners are DIN-rail mountable modules that provide a building-block approach to monitoring important machinery. The HI 5500 series of vibration signal conditioners are DIN rail mountable modules and provide a 'building-block' approach to monitoring vibration on important machinery. Each signal conditioner has a 4-20 mA and 0-5Vdc output proportional to its full scale value. The outputs can be connected to most PLCs or DCS systems, providing continuous monitoring of machinery running condition. The modules also provide access to the buffered vibration signal at a BNC connector and terminal connectors. Measurement type, detection type, frequency range and full scale operating range are selcted by the user.
Additionally, there are set point modules and rela...
Additionally, there are set point modules and relay modules that can be configured to light an annunciator or trip machinery when operating conditions exceed preset levels. The set point modules and relay modules can be used with a single signal conditioner or with groups of signal conditioners, providing a cost-effective approach to creating a monitoring system.
Features
- Accelerometer input
- 4-20 mA and 0-5 Vdc
- Buffered vibration output
- Selectable fi ltering
- Integration
- Peak, RMS or Peak-Peak
- Detection
- DIN Rail Mount
- OK Circuit LED
Application/Industries Served
- Pumps
- Fans/Blowers
- Motors
- Chillers
- Mixers
- Gears
- Compressors
- Machine Tools
Specification
HI 5501-ASTD
Standard Acceleration Input, Acceleration Output Module - accepts input signals from ICP type accelerometers like the HI 111, HI 113 and HI 115. Provides 4-20 mA and 0-5 Vdc output signals HI 5501-ASTD proportional to full scale acceleration vibration and allows access to the vibration signal for portable data collectors/analyzers. Power required is +24 Vdc. The module has a frequency range of 2-10 KHz, full scale is 10 g, sensor sensitivity is 100 mV/g, and the detection type is Peak
HI 5501-VSTD
Standard Acceleration Input, Velocity Output Module similar to the HI 5501-ASTD, except the output signals are proportional to velocity vibration. The module has frequency range 2-10 KHz, full scale is 1.0 ips, sensor sensitivity is 100 mV/g, and the detection type is Peak.
HI 5501-NS
Non Standard Order, Acceleration Input Module - Acceleration, Velocity or Displacement Output, Special Order based on specifi c application parameters. See ordering example on the next page for assistance.
HI 5501-CUST
Custom Order, Acceleration Input Module - Acceleration, Velocity, or Displacement Output. Special Order based on selection from a range of parameters, as follows: Low Pass Filter 100 Hz to 30 KHz, High Pass Filter 2 Hz to 100 Hz, Input of 10, 100 or 500 mV/g, and Low Pass/ High Pass Filter ration of greater than 2.0. Order string methodology is the same as the HI 5501-NS.
HI 5501E
HI 5501 with Hazardous Certifi cations for Class 1, Div 2, Grps. A-D, ATEX Zone 2. Part numbers become HI 5501E-ASTD or HI 5501E-VSTD. Certifi cation details: IP-54, -40 to 85°C, Class I, Zone 2, Ex nc 2C T4, AEx nc 2C T4, Class I, Div 2, ABCD. Certifi ed to: UL/CSA 60079- 15, 61010, CSA 213, 14, UL 1604 and CAN/SCA 213. European certifi cation details: Ex II 3 G EEx n AC IIC T4, IP-54, -40 to 85°C. Certifi ed to: EN60079-15, ATEX EN50021.
Customer reviews
No reviews were found for Model HI 5500 - Vibration Signal Conditioners. Be the first to review!