Villager - Model S6-4 - Stationary Systems
From Stationary Systems
Aqua Sun manufactures the Villager® S6 - 4 System. This system is a wall mount system and is completely automatic that can take its water from a river, lake, well, or holding tank systems and produce approx 6 gallons / 22 liters per minute x 60 minutes = 360 gallons / 1,322 liters per hour x 3 hours = 1,000 gallons / 3,700 liters in a 3 hour period.
This system will use a solar / battery powered 12-volt system to supply its electrical power needs. Whenever the sun is shining, the solar system will always be recharging the battery, even when the water treatment system is working. This system comes as a turn-key package. It is designed for easy installation as all of the wiring is pre wired and plumbing is pre-plumbed and all that needs to be done is hang the water treatment system on the wall in a convenient location. Plumbing in and out of the water treatment system is easy with 10 foot inlet female hose and 10 foot outlet male hose pre-plumbed into system. The Controller Panel will need to be located with-in 3 ft of the Water Treatment System preferably in between the 2 systems. The Battery Wire is prewired and will need to have the Positive (+) and Negative (-) wires connected to the battery. Mount the solar panel in a sunny location and within 25 feet of the system. Attach the solar wires to the panel that are already prewired into the control box. Install Filters and UV Lamp and the system is ready for operation. It is simple and easy to install the Villager S6-4 Solar / Battery Powered Water Purification System.