- Model EA30K - Build Your Own WWTP (Wastewater Treatment Plant)

From

0

Next, wedotanks.com® will run simulations on our unique simulation software to come up with the most cost efficient design for you and then provide design and drawings in ACAD format for layout tankage. You can build your own cast-in-place tanks or we will quote precast tanks, installed or you can hire one of our certified installers. If you build your own cast-in-place, we will provide design for cast-in-place along with drawings. All structural & mechanical drawings will be stamped by a professional engineer (PE) in your respective state.

Image

Build your own wastewater treatment plant and wedotanks.com will run simulations on our unique simulation software SassProV2 to come up with the most cost efficient design for you and then provide design and drawings in ACAD format for layout tankage. You can build your own cast-in-place tanks or we will quote precast tanks, installed or you can hire one of our certified installers. If you build your own cast-in-place, we will provide design for cast-in-place along with drawings. All structural & mechanical drawings will be stamped by a professional engineer in your respective state.

Our design allows for tanks to be installed at grade level, completely buried underground or free standing completely on top of the ground. Our pecast concrete panels are available in either plain concrete finish (left) or decorative exterior (right)

We design our tanks with common wall construction, reducing site requirements by creating a smaller footprint, thus allowing more land for development..

Image

Third, wedotanks.com will provide you with all internal equipment:

  • Piping and installation material; for an SBR, extended-aeration Plant or BNR (Biological Nutrient Removal plant (your choice);
  • Influent screen boxes, manual or mechanical. Our influent screen boxes are designed to add a mechanical screen at a later date.
  • Equalization Tank Equipment: Pumps, flow boxes, aeration equipment.

Image
  • Digestor/sludge storage: Mechanical or Airlift decanters, aeration equipment
  • Aeration Tank – Fine or course bubble diffusers, SS or PVC pipes, blowers.

Blowers located on top of tanks - All internal equipment accessible from on top of tank, all pumps on SS slide rail system for easy removal. Plus additions to existing plant are very easy with our system-the existing plant remains in operation while the addition is added.

Clarifiers: Mechanical or side slope, with mechanical or air-lift pumps, mechanical or air-lift scum skimmers.

Image

Effluent: Discharge by gravity or with integral pump station.

  • Control Panel: wedotanks will furnish a basic panel or customize with options chosen by you.

You →wedotanks.com→You
Installation: wedotanks.com will provide detailed installation instructions and include all pipe, pipe hangers, anchors and erecting; or wedotanks.com will install for a set installation feel. We can provide flow boxes, weirs, decanters, scum skimmers and other equipment and you can have you own mechanical contractor or staff install the equipment.

Start-Up: Once everything is completed wedoanks.com® will provide trained personnel to assist your people during start-up. We will conduct an on-site training session and provide a complete Operations and Maintenance Manual with sample calculations. After that, the Plant will pretty much run itself; of course, if questions come up wedotanks.com® staff is always available to answer reasonable operational questions.

Customer reviews

No reviews were found for Wedotanks - Model EA30K - Build Your Own WWTP (Wastewater Treatment Plant). Be the first to review!