Zhejiang-Lifeng - Model PSSD5-MDS313 M - Mobile Sludge Dewatering Press
From PSSD Portable Sewage Sludge Dewatering
Apart from the standard sludge dewatering lines, Lifeng PSSD can place the line onto the chassis of a lorry, eventually individual trailer or a semi-trailer. This solution is designed mainly for: municipal and industrial waste water treatment plants when sludge dewatering is required on several places, waste water treatment plants with lower sludge production, where the stationary line will be financially inconvenient.
Products Details
LIFENG PSSD effectiveness is based upon our experience over the last many years of development, where the objectives have always been to increase stability, efficiency and increase the functions of LIFENG PSSD system. A basic description of how LIFENG PSSD system works is briefly described below.
LIFENG PSSD can be operated from the control panel.
The sludge is taken up into the sludge cutting machine by pump. After sludge has been cut, the sludge is then pumped into the flocculation tank. During this process a polymer is added to cause floc.. Than the sludge flows into dewatering machine after flocculation being formed by polymer reaction between sludge and polymer. While the sludge is being transported to the dewatering machine, the operator can return the cleansed water back to its source, this keeps the process time to a bare minimum, just one of the many practical functions which makes LIFENG PSSD easy and efficient to operate. LIFENG PSSD could discharge sludge cake directly.
PSSD5-MDS313 Mobile Sludge Dewatering Press FAQ
Question 1: How much water and COD can the water treated by the machine meet the emission standards?
The stacking machine is strictly not a sewage treatment equipment, is a solid-liquid separation equipment, used in sewage treatment system sludge dewatering, case experience shows that the removal rate of sludge can reach more than 95%, while removing SS Can remove most of the suspended matter caused by the cod, the role of soluble cod limited.
Question 2: How about the shaft, such as 311, when the shaft is long?
310 Model shaft length 2200, 410 Model axis length 2570, (according to the reducer factory models have different fine-tuning).
Customer reviews
No reviews were found for Zhejiang-Lifeng - Model PSSD5-MDS313 M - Mobile Sludge Dewatering Press. Be the first to review!